QCPPolarAxisRadial
Public Types | |
enum | AngleReference { arAbsolute , arAngularAxis } |
enum | LabelMode { lmUpright , lmRotated } |
enum | ScaleType { stLinear , stLogarithmic } |
enum | SelectablePart { spNone = 0 , spAxis = 0x001 , spTickLabels = 0x002 , spAxisLabel = 0x004 } |
typedef QFlags< SelectablePart > | SelectableParts |
Public Types inherited from QObject | |
typedef | QObjectList |
Signals | |
void | rangeChanged (const QCPRange &newRange) |
void | rangeChanged (const QCPRange &newRange, const QCPRange &oldRange) |
void | scaleTypeChanged (QCPPolarAxisRadial::ScaleType scaleType) |
void | selectableChanged (const QCPPolarAxisRadial::SelectableParts &parts) |
void | selectionChanged (const QCPPolarAxisRadial::SelectableParts &parts) |
Signals inherited from QCPLayerable | |
void | layerChanged (QCPLayer *newLayer) |
Public Member Functions | |
QCPPolarAxisRadial (QCPPolarAxisAngular *parent) | |
double | angle () const |
AngleReference | angleReference () const |
QCPPolarAxisAngular * | angularAxis () const |
QPen | basePen () const |
QPointF | coordToPixel (double angleCoord, double radiusCoord) const |
double | coordToRadius (double coord) const |
SelectablePart | getPartAt (const QPointF &pos) const |
QString | label () const |
QColor | labelColor () const |
QFont | labelFont () const |
int | labelPadding () const |
void | moveRange (double diff) |
QString | numberFormat () const |
int | numberPrecision () const |
void | pixelToCoord (QPointF pixelPos, double &angleCoord, double &radiusCoord) const |
double | radiusToCoord (double radius) const |
const QCPRange | range () const |
bool | rangeDrag () const |
bool | rangeReversed () const |
bool | rangeZoom () const |
double | rangeZoomFactor () const |
void | rescale (bool onlyVisiblePlottables=false) |
void | scaleRange (double factor) |
void | scaleRange (double factor, double center) |
ScaleType | scaleType () const |
SelectableParts | selectableParts () const |
QPen | selectedBasePen () const |
QColor | selectedLabelColor () const |
QFont | selectedLabelFont () const |
SelectableParts | selectedParts () const |
QPen | selectedSubTickPen () const |
QColor | selectedTickLabelColor () const |
QFont | selectedTickLabelFont () const |
QPen | selectedTickPen () const |
virtual double | selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=0) const override |
void | setAngle (double degrees) |
void | setAngleReference (AngleReference reference) |
void | setBasePen (const QPen &pen) |
void | setLabel (const QString &str) |
void | setLabelColor (const QColor &color) |
void | setLabelFont (const QFont &font) |
void | setLabelPadding (int padding) |
void | setNumberFormat (const QString &formatCode) |
void | setNumberPrecision (int precision) |
Q_SLOT void | setRange (const QCPRange &range) |
void | setRange (double lower, double upper) |
void | setRange (double position, double size, Qt::AlignmentFlag alignment) |
void | setRangeDrag (bool enabled) |
void | setRangeLower (double lower) |
void | setRangeReversed (bool reversed) |
void | setRangeUpper (double upper) |
void | setRangeZoom (bool enabled) |
void | setRangeZoomFactor (double factor) |
Q_SLOT void | setScaleType (QCPPolarAxisRadial::ScaleType type) |
Q_SLOT void | setSelectableParts (const QCPPolarAxisRadial::SelectableParts &selectableParts) |
void | setSelectedBasePen (const QPen &pen) |
void | setSelectedLabelColor (const QColor &color) |
void | setSelectedLabelFont (const QFont &font) |
Q_SLOT void | setSelectedParts (const QCPPolarAxisRadial::SelectableParts &selectedParts) |
void | setSelectedSubTickPen (const QPen &pen) |
void | setSelectedTickLabelColor (const QColor &color) |
void | setSelectedTickLabelFont (const QFont &font) |
void | setSelectedTickPen (const QPen &pen) |
void | setSubTickLength (int inside, int outside=0) |
void | setSubTickLengthIn (int inside) |
void | setSubTickLengthOut (int outside) |
void | setSubTickPen (const QPen &pen) |
void | setSubTicks (bool show) |
void | setTicker (QSharedPointer< QCPAxisTicker > ticker) |
void | setTickLabelColor (const QColor &color) |
void | setTickLabelFont (const QFont &font) |
void | setTickLabelMode (LabelMode mode) |
void | setTickLabelPadding (int padding) |
void | setTickLabelRotation (double degrees) |
void | setTickLabels (bool show) |
void | setTickLength (int inside, int outside=0) |
void | setTickLengthIn (int inside) |
void | setTickLengthOut (int outside) |
void | setTickPen (const QPen &pen) |
void | setTicks (bool show) |
int | subTickLengthIn () const |
int | subTickLengthOut () const |
QPen | subTickPen () const |
bool | subTicks () const |
QVector< double > | subTickVector () const |
QSharedPointer< QCPAxisTicker > | ticker () const |
QColor | tickLabelColor () const |
QFont | tickLabelFont () const |
LabelMode | tickLabelMode () const |
int | tickLabelPadding () const |
double | tickLabelRotation () const |
bool | tickLabels () const |
int | tickLengthIn () const |
int | tickLengthOut () const |
QPen | tickPen () const |
bool | ticks () const |
QVector< double > | tickVector () const |
QVector< QString > | tickVectorLabels () const |
Public Member Functions inherited from QCPLayerable | |
QCPLayerable (QCustomPlot *plot, QString targetLayer=QString(), QCPLayerable *parentLayerable=nullptr) | |
bool | antialiased () const |
QCPLayer * | layer () const |
QCPLayerable * | parentLayerable () const |
QCustomPlot * | parentPlot () const |
bool | realVisibility () const |
void | setAntialiased (bool enabled) |
bool | setLayer (const QString &layerName) |
Q_SLOT bool | setLayer (QCPLayer *layer) |
void | setVisible (bool on) |
bool | visible () const |
Public Member Functions inherited from QObject | |
QObject (QObject *parent) | |
QBindable< QString > | bindableObjectName () |
bool | blockSignals (bool block) |
const QObjectList & | children () const const |
QMetaObject::Connection | connect (const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const const |
void | deleteLater () |
void | destroyed (QObject *obj) |
bool | disconnect (const char *signal, const QObject *receiver, const char *method) const const |
bool | disconnect (const QObject *receiver, const char *method) const const |
void | dumpObjectInfo () const const |
void | dumpObjectTree () const const |
QList< QByteArray > | dynamicPropertyNames () const const |
virtual bool | event (QEvent *e) |
virtual bool | eventFilter (QObject *watched, QEvent *event) |
T | findChild (const QString &name, Qt::FindChildOptions options) const const |
QList< T > | findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const |
QList< T > | findChildren (const QString &name, Qt::FindChildOptions options) const const |
QList< T > | findChildren (Qt::FindChildOptions options) const const |
bool | inherits (const char *className) const const |
void | installEventFilter (QObject *filterObj) |
bool | isQuickItemType () const const |
bool | isWidgetType () const const |
bool | isWindowType () const const |
void | killTimer (int id) |
virtual const QMetaObject * | metaObject () const const |
void | moveToThread (QThread *targetThread) |
QString | objectName () const const |
void | objectNameChanged (const QString &objectName) |
QObject * | parent () const const |
QVariant | property (const char *name) const const |
Q_CLASSINFO (Name, Value) | |
Q_EMIT Q_EMIT | |
Q_ENUM (...) | |
Q_ENUM_NS (...) | |
Q_ENUMS (...) | |
Q_FLAG (...) | |
Q_FLAG_NS (...) | |
Q_FLAGS (...) | |
Q_GADGET Q_GADGET | |
Q_GADGET_EXPORT (EXPORT_MACRO) | |
Q_INTERFACES (...) | |
Q_INVOKABLE Q_INVOKABLE | |
Q_MOC_INCLUDE Q_MOC_INCLUDE | |
Q_NAMESPACE Q_NAMESPACE | |
Q_NAMESPACE_EXPORT (EXPORT_MACRO) | |
Q_OBJECT Q_OBJECT | |
Q_PROPERTY (...) | |
Q_REVISION Q_REVISION | |
Q_SET_OBJECT_NAME (Object) | |
Q_SIGNAL Q_SIGNAL | |
Q_SIGNALS Q_SIGNALS | |
Q_SLOT Q_SLOT | |
Q_SLOTS Q_SLOTS | |
T | qobject_cast (const QObject *object) |
T | qobject_cast (QObject *object) |
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT | |
void | removeEventFilter (QObject *obj) |
void | setObjectName (const QString &name) |
void | setObjectName (QAnyStringView name) |
void | setParent (QObject *parent) |
bool | setProperty (const char *name, const QVariant &value) |
bool | setProperty (const char *name, QVariant &&value) |
bool | signalsBlocked () const const |
int | startTimer (int interval, Qt::TimerType timerType) |
int | startTimer (std::chrono::milliseconds interval, Qt::TimerType timerType) |
QThread * | thread () const const |
Protected Member Functions | |
virtual void | applyDefaultAntialiasingHint (QCPPainter *painter) const override |
virtual void | deselectEvent (bool *selectionStateChanged) override |
virtual void | draw (QCPPainter *painter) override |
QPen | getBasePen () const |
QColor | getLabelColor () const |
QFont | getLabelFont () const |
QPen | getSubTickPen () const |
QColor | getTickLabelColor () const |
QFont | getTickLabelFont () const |
QPen | getTickPen () const |
virtual void | mouseMoveEvent (QMouseEvent *event, const QPointF &startPos) override |
virtual void | mousePressEvent (QMouseEvent *event, const QVariant &details) override |
virtual void | mouseReleaseEvent (QMouseEvent *event, const QPointF &startPos) override |
virtual void | selectEvent (QMouseEvent *event, bool additive, const QVariant &details, bool *selectionStateChanged) override |
virtual QCP::Interaction | selectionCategory () const override |
void | setupTickVectors () |
void | updateGeometry (const QPointF ¢er, double radius) |
virtual void | wheelEvent (QWheelEvent *event) override |
Protected Member Functions inherited from QCPLayerable | |
void | applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const |
virtual QRect | clipRect () const |
void | initializeParentPlot (QCustomPlot *parentPlot) |
virtual void | mouseDoubleClickEvent (QMouseEvent *event, const QVariant &details) |
bool | moveToLayer (QCPLayer *layer, bool prepend) |
virtual void | parentPlotInitialized (QCustomPlot *parentPlot) |
void | setParentLayerable (QCPLayerable *parentLayerable) |
Protected Member Functions inherited from QObject | |
virtual void | childEvent (QChildEvent *event) |
virtual void | connectNotify (const QMetaMethod &signal) |
virtual void | customEvent (QEvent *event) |
virtual void | disconnectNotify (const QMetaMethod &signal) |
bool | isSignalConnected (const QMetaMethod &signal) const const |
int | receivers (const char *signal) const const |
QObject * | sender () const const |
int | senderSignalIndex () const const |
virtual void | timerEvent (QTimerEvent *event) |
Additional Inherited Members | |
Properties inherited from QObject | |
objectName | |
Static Public Member Functions inherited from QObject | |
QMetaObject::Connection | connect (const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type) |
QMetaObject::Connection | connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type) |
QMetaObject::Connection | connect (const QObject *sender, PointerToMemberFunction signal, const QObject *context, Functor functor, Qt::ConnectionType type) |
QMetaObject::Connection | connect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method, Qt::ConnectionType type) |
QMetaObject::Connection | connect (const QObject *sender, PointerToMemberFunction signal, Functor functor) |
bool | disconnect (const QMetaObject::Connection &connection) |
bool | disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *method) |
bool | disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method) |
bool | disconnect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method) |
QString | tr (const char *sourceText, const char *disambiguation, int n) |
Detailed Description
The radial axis inside a radial plot.
- Warning
- In this QCustomPlot version, polar plots are a tech preview. Expect documentation and functionality to be incomplete, as well as changing public interfaces in the future.
Each axis holds an instance of QCPAxisTicker which is used to generate the tick coordinates and tick labels. You can access the currently installed ticker or set a new one (possibly one of the specialized subclasses, or your own subclass) via setTicker. For details, see the documentation of QCPAxisTicker.
Definition at line 7007 of file qcustomplot.h.
Member Typedef Documentation
◆ SelectableParts
Definition at line 7040 of file qcustomplot.h.
Member Enumeration Documentation
◆ AngleReference
Defines the reference of the angle at which a radial axis is tilted (setAngle).
Definition at line 7017 of file qcustomplot.h.
◆ LabelMode
enum QCPPolarAxisRadial::LabelMode |
Definition at line 7042 of file qcustomplot.h.
◆ ScaleType
Defines the scale of an axis.
- See also
- setScaleType
Enumerator | |
---|---|
stLinear | Linear scaling. |
stLogarithmic | Logarithmic scaling with correspondingly transformed axis coordinates (possibly also setTicker to a QCPAxisTickerLog instance). |
Definition at line 7025 of file qcustomplot.h.
◆ SelectablePart
Defines the selectable parts of an axis.
- See also
- setSelectableParts, setSelectedParts
Enumerator | |
---|---|
spNone | None of the selectable parts. |
spAxis | The axis backbone and tick marks. |
spTickLabels | Tick labels (numbers) of this axis (as a whole, not individually) |
spAxisLabel | The axis label. |
Definition at line 7033 of file qcustomplot.h.
Constructor & Destructor Documentation
◆ QCPPolarAxisRadial()
|
explicit |
Constructs an Axis instance of Type type for the axis rect parent.
Usually it isn't necessary to instantiate axes directly, because you can let QCustomPlot create them for you with QCPAxisRect::addAxis. If you want to use own QCPAxis-subclasses however, create them manually and then inject them also via QCPAxisRect::addAxis.
Definition at line 31099 of file qcustomplot.cpp.
◆ ~QCPPolarAxisRadial()
|
virtual |
Definition at line 31161 of file qcustomplot.cpp.
Member Function Documentation
◆ angle()
|
inline |
Definition at line 7059 of file qcustomplot.h.
◆ angleReference()
|
inline |
Definition at line 7060 of file qcustomplot.h.
◆ angularAxis()
|
inline |
Definition at line 7055 of file qcustomplot.h.
◆ applyDefaultAntialiasingHint()
|
overrideprotectedvirtual |
A convenience function to easily set the QPainter::Antialiased hint on the provided painter before drawing axis lines.
This is the antialiasing state the painter passed to the draw method is in by default.
This function takes into account the local setting of the antialiasing flag as well as the overrides set with QCustomPlot::setAntialiasedElements and QCustomPlot::setNotAntialiasedElements.
\seebaseclassmethod
- See also
- setAntialiased
Implements QCPLayerable.
Definition at line 32320 of file qcustomplot.cpp.
◆ basePen()
|
inline |
Definition at line 7079 of file qcustomplot.h.
◆ coordToPixel()
QPointF QCPPolarAxisRadial::coordToPixel | ( | double | angleCoord, |
double | radiusCoord ) const |
Transforms value, in coordinates of the axis, to pixel coordinates of the QCustomPlot widget.
Definition at line 32054 of file qcustomplot.cpp.
◆ coordToRadius()
double QCPPolarAxisRadial::coordToRadius | ( | double | coord | ) | const |
Definition at line 32061 of file qcustomplot.cpp.
◆ deselectEvent()
|
overrideprotectedvirtual |
This event is called when the layerable shall be deselected, either as consequence of a user interaction or a call to QCustomPlot::deselectAll. Subclasses should react to it by unsetting their selection appropriately.
just as in selectEvent, the output parameter selectionStateChanged (if non-null), must return true or false when the selection state of this layerable has changed or not changed, respectively.
- See also
- selectTest, selectEvent
Reimplemented from QCPLayerable.
Definition at line 32158 of file qcustomplot.cpp.
◆ draw()
|
overrideprotectedvirtual |
Draws the axis with the specified painter, using the internal QCPAxisPainterPrivate instance.
\seebaseclassmethod
Implements QCPLayerable.
Definition at line 32331 of file qcustomplot.cpp.
◆ getBasePen()
|
protected |
Returns the pen that is used to draw the axis base line. Depending on the selection state, this is either mSelectedBasePen or mBasePen.
Definition at line 32397 of file qcustomplot.cpp.
◆ getLabelColor()
|
protected |
Returns the color that is used to draw the axis label. Depending on the selection state, this is either mSelectedLabelColor or mLabelColor.
Definition at line 32457 of file qcustomplot.cpp.
◆ getLabelFont()
|
protected |
Returns the font that is used to draw the axis label. Depending on the selection state, this is either mSelectedLabelFont or mLabelFont.
Definition at line 32437 of file qcustomplot.cpp.
◆ getPartAt()
QCPPolarAxisRadial::SelectablePart QCPPolarAxisRadial::getPartAt | ( | const QPointF & | pos | ) | const |
Returns the part of the axis that is hit by pos (in pixels). The return value of this function is independent of the user-selectable parts defined with setSelectableParts. Further, this function does not change the current selection state of the axis.
If the axis is not visible (setVisible), this function always returns spNone.
Definition at line 32112 of file qcustomplot.cpp.
◆ getSubTickPen()
|
protected |
Returns the pen that is used to draw the subticks. Depending on the selection state, this is either mSelectedSubTickPen or mSubTickPen.
Definition at line 32417 of file qcustomplot.cpp.
◆ getTickLabelColor()
|
protected |
Returns the color that is used to draw the tick labels. Depending on the selection state, this is either mSelectedTickLabelColor or mTickLabelColor.
Definition at line 32447 of file qcustomplot.cpp.
◆ getTickLabelFont()
|
protected |
Returns the font that is used to draw the tick labels. Depending on the selection state, this is either mSelectedTickLabelFont or mTickLabelFont.
Definition at line 32427 of file qcustomplot.cpp.
◆ getTickPen()
|
protected |
Returns the pen that is used to draw the (major) ticks. Depending on the selection state, this is either mSelectedTickPen or mTickPen.
Definition at line 32407 of file qcustomplot.cpp.
◆ label()
|
inline |
Definition at line 7084 of file qcustomplot.h.
◆ labelColor()
|
inline |
Definition at line 7083 of file qcustomplot.h.
◆ labelFont()
|
inline |
Definition at line 7082 of file qcustomplot.h.
◆ labelPadding()
int QCPPolarAxisRadial::labelPadding | ( | ) | const |
Definition at line 31215 of file qcustomplot.cpp.
◆ mouseMoveEvent()
|
overrideprotectedvirtual |
This mouse event reimplementation provides the functionality to let the user drag individual axes exclusively, by startig the drag on top of the axis.
\seebaseclassmethod
- Note
- The dragging of possibly multiple axes at once by starting the drag anywhere in the axis rect is handled by the axis rect's mouse event, e.g. QCPAxisRect::mousePressEvent.
- See also
- QCPAxis::mousePressEvent
Reimplemented from QCPLayerable.
Definition at line 32217 of file qcustomplot.cpp.
◆ mousePressEvent()
|
overrideprotectedvirtual |
This mouse event reimplementation provides the functionality to let the user drag individual axes exclusively, by startig the drag on top of the axis.
For the axis to accept this event and perform the single axis drag, the parent QCPAxisRect must be configured accordingly, i.e. it must allow range dragging in the orientation of this axis (QCPAxisRect::setRangeDrag) and this axis must be a draggable axis (QCPAxisRect::setRangeDragAxes)
\seebaseclassmethod
- Note
- The dragging of possibly multiple axes at once by starting the drag anywhere in the axis rect is handled by the axis rect's mouse event, e.g. QCPAxisRect::mousePressEvent.
Reimplemented from QCPLayerable.
Definition at line 32181 of file qcustomplot.cpp.
◆ mouseReleaseEvent()
|
overrideprotectedvirtual |
This mouse event reimplementation provides the functionality to let the user drag individual axes exclusively, by startig the drag on top of the axis.
\seebaseclassmethod
- Note
- The dragging of possibly multiple axes at once by starting the drag anywhere in the axis rect is handled by the axis rect's mouse event, e.g. QCPAxisRect::mousePressEvent.
- See also
- QCPAxis::mousePressEvent
Reimplemented from QCPLayerable.
Definition at line 32255 of file qcustomplot.cpp.
◆ moveRange()
void QCPPolarAxisRadial::moveRange | ( | double | diff | ) |
If the scale type (setScaleType) is stLinear, diff is added to the lower and upper bounds of the range. The range is simply moved by diff.
If the scale type is stLogarithmic, the range bounds are multiplied by diff. This corresponds to an apparent "linear" move in logarithmic scaling by a distance of log(diff).
Definition at line 31921 of file qcustomplot.cpp.
◆ numberFormat()
QString QCPPolarAxisRadial::numberFormat | ( | ) | const |
Definition at line 31177 of file qcustomplot.cpp.
◆ numberPrecision()
|
inline |
Definition at line 7070 of file qcustomplot.h.
◆ pixelToCoord()
void QCPPolarAxisRadial::pixelToCoord | ( | QPointF | pixelPos, |
double & | angleCoord, | ||
double & | radiusCoord ) const |
Transforms value, in pixel coordinates of the QCustomPlot widget, to axis coordinates.
Definition at line 32044 of file qcustomplot.cpp.
◆ radiusToCoord()
double QCPPolarAxisRadial::radiusToCoord | ( | double | radius | ) | const |
Definition at line 32085 of file qcustomplot.cpp.
◆ range()
|
inline |
Definition at line 7057 of file qcustomplot.h.
◆ rangeChanged [1/2]
|
signal |
This signal is emitted when the range of this axis has changed. You can connect it to the setRange slot of another axis to communicate the new range to the other axis, in order for it to be synchronized.
You may also manipulate/correct the range with setRange in a slot connected to this signal. This is useful if for example a maximum range span shall not be exceeded, or if the lower/upper range shouldn't go beyond certain values (see QCPRange::bounded). For example, the following slot would limit the x axis to ranges between 0 and 10:
◆ rangeChanged [2/2]
|
signal |
This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
Additionally to the new range, this signal also provides the previous range held by the axis as oldRange.
◆ rangeDrag()
|
inline |
Definition at line 7051 of file qcustomplot.h.
◆ rangeReversed()
|
inline |
Definition at line 7058 of file qcustomplot.h.
◆ rangeZoom()
|
inline |
Definition at line 7052 of file qcustomplot.h.
◆ rangeZoomFactor()
|
inline |
Definition at line 7053 of file qcustomplot.h.
◆ rescale()
void QCPPolarAxisRadial::rescale | ( | bool | onlyVisiblePlottables = false | ) |
Changes the axis range such that all plottables associated with this axis are fully visible in that dimension.
Definition at line 31992 of file qcustomplot.cpp.
◆ scaleRange() [1/2]
void QCPPolarAxisRadial::scaleRange | ( | double | factor | ) |
Scales the range of this axis by factor around the center of the current axis range. For example, if factor is 2.0, then the axis range will double its size, and the point at the axis range center won't have changed its position in the QCustomPlot widget (i.e. coordinates around the center will have moved symmetrically closer).
If you wish to scale around a different coordinate than the current axis range center, use the overload scaleRange(double factor, double center).
Definition at line 31946 of file qcustomplot.cpp.
◆ scaleRange() [2/2]
void QCPPolarAxisRadial::scaleRange | ( | double | factor, |
double | center ) |
This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
Scales the range of this axis by factor around the coordinate center. For example, if factor is 2.0, center is 1.0, then the axis range will double its size, and the point at coordinate 1.0 won't have changed its position in the QCustomPlot widget (i.e. coordinates around 1.0 will have moved symmetrically closer to 1.0).
- See also
- scaleRange(double factor)
Definition at line 31960 of file qcustomplot.cpp.
◆ scaleType()
|
inline |
Definition at line 7056 of file qcustomplot.h.
◆ scaleTypeChanged
|
signal |
This signal is emitted when the scale type changes, by calls to setScaleType
◆ selectableChanged
|
signal |
This signal is emitted when the selectability changes, by calls to setSelectableParts
◆ selectableParts()
|
inline |
Definition at line 7087 of file qcustomplot.h.
◆ selectedBasePen()
|
inline |
Definition at line 7092 of file qcustomplot.h.
◆ selectedLabelColor()
|
inline |
Definition at line 7091 of file qcustomplot.h.
◆ selectedLabelFont()
|
inline |
Definition at line 7089 of file qcustomplot.h.
◆ selectedParts()
|
inline |
Definition at line 7086 of file qcustomplot.h.
◆ selectedSubTickPen()
|
inline |
Definition at line 7094 of file qcustomplot.h.
◆ selectedTickLabelColor()
|
inline |
Definition at line 7090 of file qcustomplot.h.
◆ selectedTickLabelFont()
|
inline |
Definition at line 7088 of file qcustomplot.h.
◆ selectedTickPen()
|
inline |
Definition at line 7093 of file qcustomplot.h.
◆ selectEvent()
|
overrideprotectedvirtual |
This event is called when the layerable shall be selected, as a consequence of a click by the user. Subclasses should react to it by setting their selection state appropriately. The default implementation does nothing.
event is the mouse event that caused the selection. additive indicates, whether the user was holding the multi-select-modifier while performing the selection (see QCustomPlot::setMultiSelectModifier). if additive is true, the selection state must be toggled (i.e. become selected when unselected and unselected when selected).
Every selectEvent is preceded by a call to selectTest, which has returned positively (i.e. returned a value greater than 0 and less than the selection tolerance of the parent QCustomPlot). The details data you output from selectTest is fed back via details here. You may use it to transport any kind of information from the selectTest to the possibly subsequent selectEvent. Usually details is used to transfer which part was clicked, if it is a layerable that has multiple individually selectable parts (like QCPAxis). This way selectEvent doesn't need to do the calculation again to find out which part was actually clicked.
selectionStateChanged is an output parameter. If the pointer is non-null, this function must set the value either to true or false, depending on whether the selection state of this layerable was actually changed. For layerables that only are selectable as a whole and not in parts, this is simple: if additive is true, selectionStateChanged must also be set to true, because the selection toggles. If additive is false, selectionStateChanged is only set to true, if the layerable was previously unselected and now is switched to the selected state.
- See also
- selectTest, deselectEvent
Reimplemented from QCPLayerable.
Definition at line 32144 of file qcustomplot.cpp.
◆ selectionCategory()
|
overrideprotectedvirtual |
Returns the selection category this layerable shall belong to. The selection category is used in conjunction with QCustomPlot::setInteractions to control which objects are selectable and which aren't.
Subclasses that don't fit any of the normal QCP::Interaction values can use QCP::iSelectOther. This is what the default implementation returns.
- See also
- QCustomPlot::setInteractions
Reimplemented from QCPLayerable.
Definition at line 32464 of file qcustomplot.cpp.
◆ selectionChanged
|
signal |
This signal is emitted when the selection state of this axis has changed, either by user interaction or by a direct call to setSelectedParts.
◆ selectTest()
|
overridevirtual |
This function is used to decide whether a click hits a layerable object or not.
pos is a point in pixel coordinates on the QCustomPlot surface. This function returns the shortest pixel distance of this point to the object. If the object is either invisible or the distance couldn't be determined, -1.0 is returned. Further, if onlySelectable is true and the object is not selectable, -1.0 is returned, too.
If the object is represented not by single lines but by an area like a QCPItemText or the bars of a QCPBars plottable, a click inside the area should also be considered a hit. In these cases this function thus returns a constant value greater zero but still below the parent plot's selection tolerance. (typically the selectionTolerance multiplied by 0.99).
Providing a constant value for area objects allows selecting line objects even when they are obscured by such area objects, by clicking close to the lines (i.e. closer than 0.99*selectionTolerance).
The actual setting of the selection state is not done by this function. This is handled by the parent QCustomPlot when the mouseReleaseEvent occurs, and the finally selected object is notified via the selectEvent/ deselectEvent methods.
details is an optional output parameter. Every layerable subclass may place any information in details. This information will be passed to selectEvent when the parent QCustomPlot decides on the basis of this selectTest call, that the object was successfully selected. The subsequent call to selectEvent will carry the details. This is useful for multi-part objects (like QCPAxis). This way, a possibly complex calculation to decide which part was clicked is only done once in selectTest. The result (i.e. the actually clicked part) can then be placed in details. So in the subsequent selectEvent, the decision which part was selected doesn't have to be done a second time for a single selection operation.
In the case of 1D Plottables (QCPAbstractPlottable1D, like QCPGraph or QCPBars) details will be set to a QCPDataSelection, describing the closest data point to pos.
You may pass nullptr
as details to indicate that you are not interested in those selection details.
- See also
- selectEvent, deselectEvent, mousePressEvent, wheelEvent, QCustomPlot::setInteractions, QCPAbstractPlottable1D::selectTestRect
Reimplemented from QCPLayerable.
Definition at line 32131 of file qcustomplot.cpp.
◆ setAngle()
void QCPPolarAxisRadial::setAngle | ( | double | degrees | ) |
Definition at line 31438 of file qcustomplot.cpp.
◆ setAngleReference()
void QCPPolarAxisRadial::setAngleReference | ( | AngleReference | reference | ) |
Definition at line 31443 of file qcustomplot.cpp.
◆ setBasePen()
void QCPPolarAxisRadial::setBasePen | ( | const QPen & | pen | ) |
Sets the pen, the axis base line is drawn with.
- See also
- setTickPen, setSubTickPen
Definition at line 31760 of file qcustomplot.cpp.
◆ setLabel()
void QCPPolarAxisRadial::setLabel | ( | const QString & | str | ) |
Sets the text of the axis label that will be shown below/above or next to the axis, depending on its orientation. To disable axis labels, pass an empty string as str.
Definition at line 31813 of file qcustomplot.cpp.
◆ setLabelColor()
void QCPPolarAxisRadial::setLabelColor | ( | const QColor & | color | ) |
Sets the color of the axis label.
- See also
- setLabelFont
Definition at line 31804 of file qcustomplot.cpp.
◆ setLabelFont()
void QCPPolarAxisRadial::setLabelFont | ( | const QFont & | font | ) |
Sets the font of the axis label.
- See also
- setLabelColor
Definition at line 31790 of file qcustomplot.cpp.
◆ setLabelPadding()
void QCPPolarAxisRadial::setLabelPadding | ( | int | padding | ) |
Sets the distance between the tick labels and the axis label.
- See also
- setTickLabelPadding, setPadding
Definition at line 31827 of file qcustomplot.cpp.
◆ setNumberFormat()
void QCPPolarAxisRadial::setNumberFormat | ( | const QString & | formatCode | ) |
Sets the number format for the numbers in tick labels. This formatCode is an extended version of the format code used e.g. by QString::number() and QLocale::toString(). For reference about that, see the "Argument Formats" section in the detailed description of the QString class.
formatCode is a string of one, two or three characters. The first character is identical to the normal format code used by Qt. In short, this means: 'e'/'E' scientific format, 'f' fixed format, 'g'/'G' scientific or fixed, whichever is shorter.
The second and third characters are optional and specific to QCustomPlot:
If the first char was 'e' or 'g', numbers are/might be displayed in the scientific format, e.g. "5.5e9", which is ugly in a plot. So when the second char of formatCode is set to 'b' (for "beautiful"), those exponential numbers are formatted in a more natural way, i.e. "5.5
[multiplication sign] 10 [superscript] 9". By default, the multiplication sign is a centered dot. If instead a cross should be shown (as is usual in the USA), the third char of formatCode can be set to 'c'. The inserted multiplication signs are the UTF-8 characters 215 (0xD7) for the cross and 183 (0xB7) for the dot.
Examples for formatCode:
g
normal format code behaviour. If number is small, fixed format is used, if number is large, normal scientific format is usedgb
If number is small, fixed format is used, if number is large, scientific format is used with beautifully typeset decimal powers and a dot as multiplication signebc
All numbers are in scientific format with beautifully typeset decimal power and a cross as multiplication signfb
illegal format code, since fixed format doesn't support (or need) beautifully typeset decimal powers. Format code will be reduced to 'f'.hello
illegal format code, since first char is not 'e', 'E', 'f', 'g' or 'G'. Current format code will not be changed.
Definition at line 31587 of file qcustomplot.cpp.
◆ setNumberPrecision()
void QCPPolarAxisRadial::setNumberPrecision | ( | int | precision | ) |
Sets the precision of the tick label numbers. See QLocale::toString(double i, char f, int prec) for details. The effect of precisions are most notably for number Formats starting with 'e', see setNumberFormat
Definition at line 31642 of file qcustomplot.cpp.
◆ setRange() [1/3]
void QCPPolarAxisRadial::setRange | ( | const QCPRange & | range | ) |
Sets the range of the axis.
This slot may be connected with the rangeChanged signal of another axis so this axis is always synchronized with the other axis range, when it changes.
To invert the direction of an axis, use setRangeReversed.
Definition at line 31269 of file qcustomplot.cpp.
◆ setRange() [2/3]
void QCPPolarAxisRadial::setRange | ( | double | lower, |
double | upper ) |
This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
Sets the lower and upper bound of the axis range.
To invert the direction of an axis, use setRangeReversed.
There is also a slot to set a range, see setRange(const QCPRange &range).
Definition at line 31339 of file qcustomplot.cpp.
◆ setRange() [3/3]
void QCPPolarAxisRadial::setRange | ( | double | position, |
double | size, | ||
Qt::AlignmentFlag | alignment ) |
This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
Sets the range of the axis.
The position coordinate indicates together with the alignment parameter, where the new range will be positioned. size defines the size of the new axis range. alignment may be Qt::AlignLeft, Qt::AlignRight or Qt::AlignCenter. This will cause the left border, right border, or center of the range to be aligned with position. Any other values of alignment will default to Qt::AlignCenter.
Definition at line 31370 of file qcustomplot.cpp.
◆ setRangeDrag()
void QCPPolarAxisRadial::setRangeDrag | ( | bool | enabled | ) |
Definition at line 31220 of file qcustomplot.cpp.
◆ setRangeLower()
void QCPPolarAxisRadial::setRangeLower | ( | double | lower | ) |
Sets the lower bound of the axis range. The upper bound is not changed.
- See also
- setRange
Definition at line 31384 of file qcustomplot.cpp.
◆ setRangeReversed()
void QCPPolarAxisRadial::setRangeReversed | ( | bool | reversed | ) |
Sets whether the axis range (direction) is displayed reversed. Normally, the values on horizontal axes increase left to right, on vertical axes bottom to top. When reversed is set to true, the direction of increasing values is inverted.
Note that the range and data interface stays the same for reversed axes, e.g. the lower part of the setRange interface will still reference the mathematically smaller number than the upper part.
Definition at line 31433 of file qcustomplot.cpp.
◆ setRangeUpper()
void QCPPolarAxisRadial::setRangeUpper | ( | double | upper | ) |
Sets the upper bound of the axis range. The lower bound is not changed.
- See also
- setRange
Definition at line 31406 of file qcustomplot.cpp.
◆ setRangeZoom()
void QCPPolarAxisRadial::setRangeZoom | ( | bool | enabled | ) |
Definition at line 31225 of file qcustomplot.cpp.
◆ setRangeZoomFactor()
void QCPPolarAxisRadial::setRangeZoomFactor | ( | double | factor | ) |
Definition at line 31230 of file qcustomplot.cpp.
◆ setScaleType()
void QCPPolarAxisRadial::setScaleType | ( | QCPPolarAxisRadial::ScaleType | type | ) |
Sets whether the axis uses a linear scale or a logarithmic scale.
Note that this method controls the coordinate transformation. For logarithmic scales, you will likely also want to use a logarithmic tick spacing and labeling, which can be achieved by setting the axis ticker to an instance of QCPAxisTickerLog :
See the documentation of QCPAxisTickerLog about the details of logarithmic axis tick creation.
Definition at line 31249 of file qcustomplot.cpp.
◆ setSelectableParts()
void QCPPolarAxisRadial::setSelectableParts | ( | const QCPPolarAxisRadial::SelectableParts & | selectableParts | ) |
Sets whether the user can (de-)select the parts in selectable by clicking on the QCustomPlot surface. (When QCustomPlot::setInteractions contains iSelectAxes.)
However, even when selectable is set to a value not allowing the selection of a specific part, it is still possible to set the selection of this part manually, by calling setSelectedParts directly.
- See also
- SelectablePart, setSelectedParts
Definition at line 31297 of file qcustomplot.cpp.
◆ setSelectedBasePen()
void QCPPolarAxisRadial::setSelectedBasePen | ( | const QPen & | pen | ) |
Sets the pen that is used to draw the axis base line when selected.
Definition at line 31889 of file qcustomplot.cpp.
◆ setSelectedLabelColor()
void QCPPolarAxisRadial::setSelectedLabelColor | ( | const QColor & | color | ) |
Sets the color that is used for the axis label when it is selected.
Definition at line 31879 of file qcustomplot.cpp.
◆ setSelectedLabelFont()
void QCPPolarAxisRadial::setSelectedLabelFont | ( | const QFont & | font | ) |
Sets the font that is used for the axis label when it is selected.
Definition at line 31855 of file qcustomplot.cpp.
◆ setSelectedParts()
void QCPPolarAxisRadial::setSelectedParts | ( | const QCPPolarAxisRadial::SelectableParts & | selectedParts | ) |
Sets the selected state of the respective axis parts described by SelectablePart. When a part is selected, it uses a different pen/font.
The entire selection mechanism for axes is handled automatically when QCustomPlot::setInteractions contains iSelectAxes. You only need to call this function when you wish to change the selection state manually.
This function can change the selection state of a part, independent of the setSelectableParts setting.
emits the selectionChanged signal when selected is different from the previous selection state.
- See also
- SelectablePart, setSelectableParts, selectTest, setSelectedBasePen, setSelectedTickPen, setSelectedSubTickPen, setSelectedTickLabelFont, setSelectedLabelFont, setSelectedTickLabelColor, setSelectedLabelColor
Definition at line 31321 of file qcustomplot.cpp.
◆ setSelectedSubTickPen()
void QCPPolarAxisRadial::setSelectedSubTickPen | ( | const QPen & | pen | ) |
Sets the pen that is used to draw the subticks when selected.
Definition at line 31909 of file qcustomplot.cpp.
◆ setSelectedTickLabelColor()
void QCPPolarAxisRadial::setSelectedTickLabelColor | ( | const QColor & | color | ) |
Sets the color that is used for tick labels when they are selected.
Definition at line 31866 of file qcustomplot.cpp.
◆ setSelectedTickLabelFont()
void QCPPolarAxisRadial::setSelectedTickLabelFont | ( | const QFont & | font | ) |
Sets the font that is used for tick labels when they are selected.
Definition at line 31841 of file qcustomplot.cpp.
◆ setSelectedTickPen()
void QCPPolarAxisRadial::setSelectedTickPen | ( | const QPen & | pen | ) |
Sets the pen that is used to draw the (major) ticks when selected.
Definition at line 31899 of file qcustomplot.cpp.
◆ setSubTickLength()
void QCPPolarAxisRadial::setSubTickLength | ( | int | inside, |
int | outside = 0 ) |
Sets the length of the subticks in pixels. inside is the length the subticks will reach inside the plot and outside is the length they will reach outside the plot. If outside is greater than zero, the tick labels and axis label will increase their distance to the axis accordingly, so they won't collide with the ticks.
Definition at line 31719 of file qcustomplot.cpp.
◆ setSubTickLengthIn()
void QCPPolarAxisRadial::setSubTickLengthIn | ( | int | inside | ) |
Sets the length of the inward subticks in pixels. inside is the length the subticks will reach inside the plot.
- See also
- setSubTickLengthOut, setSubTickLength, setTickLength
Definition at line 31731 of file qcustomplot.cpp.
◆ setSubTickLengthOut()
void QCPPolarAxisRadial::setSubTickLengthOut | ( | int | outside | ) |
Sets the length of the outward subticks in pixels. outside is the length the subticks will reach outside the plot. If outside is greater than zero, the tick labels will increase their distance to the axis accordingly, so they won't collide with the ticks.
- See also
- setSubTickLengthIn, setSubTickLength, setTickLength
Definition at line 31746 of file qcustomplot.cpp.
◆ setSubTickPen()
void QCPPolarAxisRadial::setSubTickPen | ( | const QPen & | pen | ) |
Sets the pen, subtick marks will be drawn with.
- See also
- setSubTickCount, setSubTickLength, setBasePen
Definition at line 31780 of file qcustomplot.cpp.
◆ setSubTicks()
void QCPPolarAxisRadial::setSubTicks | ( | bool | show | ) |
Sets whether sub tick marks are displayed.
Sub ticks are only potentially visible if (major) ticks are also visible (see setTicks)
- See also
- setTicks
Definition at line 31702 of file qcustomplot.cpp.
◆ setTicker()
void QCPPolarAxisRadial::setTicker | ( | QSharedPointer< QCPAxisTicker > | ticker | ) |
The axis ticker is responsible for generating the tick positions and tick labels. See the documentation of QCPAxisTicker for details on how to work with axis tickers.
You can change the tick positioning/labeling behaviour of this axis by setting a different QCPAxisTicker subclass using this method. If you only wish to modify the currently installed axis ticker, access it via ticker.
Since the ticker is stored in the axis as a shared pointer, multiple axes may share the same axis ticker simply by passing the same shared pointer to multiple axes.
- See also
- ticker
Definition at line 31461 of file qcustomplot.cpp.
◆ setTickLabelColor()
void QCPPolarAxisRadial::setTickLabelColor | ( | const QColor & | color | ) |
Sets the color of the tick labels.
- See also
- setTickLabels, setTickLabelFont
Definition at line 31529 of file qcustomplot.cpp.
◆ setTickLabelFont()
void QCPPolarAxisRadial::setTickLabelFont | ( | const QFont & | font | ) |
Sets the font of the tick labels.
- See also
- setTickLabels, setTickLabelColor
Definition at line 31515 of file qcustomplot.cpp.
◆ setTickLabelMode()
void QCPPolarAxisRadial::setTickLabelMode | ( | LabelMode | mode | ) |
Definition at line 31548 of file qcustomplot.cpp.
◆ setTickLabelPadding()
void QCPPolarAxisRadial::setTickLabelPadding | ( | int | padding | ) |
Sets the distance between the axis base line (including any outward ticks) and the tick labels.
- See also
- setLabelPadding, setPadding
Definition at line 31505 of file qcustomplot.cpp.
◆ setTickLabelRotation()
void QCPPolarAxisRadial::setTickLabelRotation | ( | double | degrees | ) |
Sets the rotation of the tick labels. If degrees is zero, the labels are drawn normally. Else, the tick labels are drawn rotated by degrees clockwise. The specified angle is bound to values from -90 to 90 degrees.
If degrees is exactly -90, 0 or 90, the tick labels are centered on the tick coordinate. For other angles, the label is drawn with an offset such that it seems to point toward or away from the tick mark.
Definition at line 31543 of file qcustomplot.cpp.
◆ setTickLabels()
void QCPPolarAxisRadial::setTickLabels | ( | bool | show | ) |
Sets whether tick labels are displayed. Tick labels are the numbers drawn next to tick marks.
Definition at line 31490 of file qcustomplot.cpp.
◆ setTickLength()
void QCPPolarAxisRadial::setTickLength | ( | int | inside, |
int | outside = 0 ) |
Sets the length of the ticks in pixels. inside is the length the ticks will reach inside the plot and outside is the length they will reach outside the plot. If outside is greater than zero, the tick labels and axis label will increase their distance to the axis accordingly, so they won't collide with the ticks.
- See also
- setSubTickLength, setTickLengthIn, setTickLengthOut
Definition at line 31659 of file qcustomplot.cpp.
◆ setTickLengthIn()
void QCPPolarAxisRadial::setTickLengthIn | ( | int | inside | ) |
Sets the length of the inward ticks in pixels. inside is the length the ticks will reach inside the plot.
- See also
- setTickLengthOut, setTickLength, setSubTickLength
Definition at line 31671 of file qcustomplot.cpp.
◆ setTickLengthOut()
void QCPPolarAxisRadial::setTickLengthOut | ( | int | outside | ) |
Sets the length of the outward ticks in pixels. outside is the length the ticks will reach outside the plot. If outside is greater than zero, the tick labels and axis label will increase their distance to the axis accordingly, so they won't collide with the ticks.
- See also
- setTickLengthIn, setTickLength, setSubTickLength
Definition at line 31686 of file qcustomplot.cpp.
◆ setTickPen()
void QCPPolarAxisRadial::setTickPen | ( | const QPen & | pen | ) |
Sets the pen, tick marks will be drawn with.
- See also
- setTickLength, setBasePen
Definition at line 31770 of file qcustomplot.cpp.
◆ setTicks()
void QCPPolarAxisRadial::setTicks | ( | bool | show | ) |
Sets whether tick marks are displayed.
Note that setting show to false does not imply that tick labels are invisible, too. To achieve that, see setTickLabels.
- See also
- setSubTicks
Definition at line 31478 of file qcustomplot.cpp.
◆ setupTickVectors()
|
protected |
Prepares the internal tick vector, sub tick vector and tick label vector. This is done by calling QCPAxisTicker::generate on the currently installed ticker.
If a change in the label text/count is detected, the cached axis margin is invalidated to make sure the next margin calculation recalculates the label sizes and returns an up-to-date value.
Definition at line 32384 of file qcustomplot.cpp.
◆ subTickLengthIn()
int QCPPolarAxisRadial::subTickLengthIn | ( | ) | const |
Definition at line 31203 of file qcustomplot.cpp.
◆ subTickLengthOut()
int QCPPolarAxisRadial::subTickLengthOut | ( | ) | const |
Definition at line 31209 of file qcustomplot.cpp.
◆ subTickPen()
|
inline |
Definition at line 7081 of file qcustomplot.h.
◆ subTicks()
|
inline |
Definition at line 7076 of file qcustomplot.h.
◆ subTickVector()
|
inline |
Definition at line 7072 of file qcustomplot.h.
◆ ticker()
|
inline |
Returns a modifiable shared pointer to the currently installed axis ticker. The axis ticker is responsible for generating the tick positions and tick labels of this axis. You can access the QCPAxisTicker with this method and modify basic properties such as the approximate tick count (QCPAxisTicker::setTickCount).
You can gain more control over the axis ticks by setting a different QCPAxisTicker subclass, see the documentation there. A new axis ticker can be set with setTicker.
Since the ticker is stored in the axis as a shared pointer, multiple axes may share the same axis ticker simply by passing the same shared pointer to multiple axes.
- See also
- setTicker
Definition at line 7061 of file qcustomplot.h.
◆ tickLabelColor()
|
inline |
Definition at line 7066 of file qcustomplot.h.
◆ tickLabelFont()
|
inline |
Definition at line 7065 of file qcustomplot.h.
◆ tickLabelMode()
QCPPolarAxisRadial::LabelMode QCPPolarAxisRadial::tickLabelMode | ( | ) | const |
Definition at line 31165 of file qcustomplot.cpp.
◆ tickLabelPadding()
|
inline |
Definition at line 7064 of file qcustomplot.h.
◆ tickLabelRotation()
|
inline |
Definition at line 7067 of file qcustomplot.h.
◆ tickLabels()
|
inline |
Definition at line 7063 of file qcustomplot.h.
◆ tickLengthIn()
int QCPPolarAxisRadial::tickLengthIn | ( | ) | const |
Definition at line 31191 of file qcustomplot.cpp.
◆ tickLengthOut()
int QCPPolarAxisRadial::tickLengthOut | ( | ) | const |
Definition at line 31197 of file qcustomplot.cpp.
◆ tickPen()
|
inline |
Definition at line 7080 of file qcustomplot.h.
◆ ticks()
|
inline |
Definition at line 7062 of file qcustomplot.h.
◆ tickVector()
|
inline |
Definition at line 7071 of file qcustomplot.h.
◆ tickVectorLabels()
Definition at line 7073 of file qcustomplot.h.
◆ updateGeometry()
|
protected |
Definition at line 32298 of file qcustomplot.cpp.
◆ wheelEvent()
|
overrideprotectedvirtual |
This mouse event reimplementation provides the functionality to let the user zoom individual axes exclusively, by performing the wheel event on top of the axis.
For the axis to accept this event and perform the single axis zoom, the parent QCPAxisRect must be configured accordingly, i.e. it must allow range zooming in the orientation of this axis (QCPAxisRect::setRangeZoom) and this axis must be a zoomable axis (QCPAxisRect::setRangeZoomAxes)
\seebaseclassmethod
- Note
- The zooming of possibly multiple axes at once by performing the wheel event anywhere in the axis rect is handled by the axis rect's mouse event, e.g. QCPAxisRect::wheelEvent.
Reimplemented from QCPLayerable.
Definition at line 32282 of file qcustomplot.cpp.
Member Data Documentation
◆ mAADragBackup
|
protected |
Definition at line 7212 of file qcustomplot.h.
◆ mAngle
|
protected |
Definition at line 7173 of file qcustomplot.h.
◆ mAngleReference
|
protected |
Definition at line 7174 of file qcustomplot.h.
◆ mAngularAxis
|
protected |
Definition at line 7172 of file qcustomplot.h.
◆ mBasePen
|
protected |
Definition at line 7176 of file qcustomplot.h.
◆ mCenter
|
protected |
Definition at line 7204 of file qcustomplot.h.
◆ mDragging
|
protected |
Definition at line 7210 of file qcustomplot.h.
◆ mDragStartRange
|
protected |
Definition at line 7211 of file qcustomplot.h.
◆ mLabel
|
protected |
Definition at line 7179 of file qcustomplot.h.
◆ mLabelColor
|
protected |
Definition at line 7181 of file qcustomplot.h.
◆ mLabelFont
|
protected |
Definition at line 7180 of file qcustomplot.h.
◆ mLabelPadding
|
protected |
Definition at line 7178 of file qcustomplot.h.
◆ mLabelPainter
|
protected |
Definition at line 7213 of file qcustomplot.h.
◆ mNotAADragBackup
|
protected |
Definition at line 7212 of file qcustomplot.h.
◆ mNumberBeautifulPowers
|
protected |
Definition at line 7190 of file qcustomplot.h.
◆ mNumberFormatChar
|
protected |
Definition at line 7189 of file qcustomplot.h.
◆ mNumberMultiplyCross
|
protected |
Definition at line 7191 of file qcustomplot.h.
◆ mNumberPrecision
|
protected |
Definition at line 7188 of file qcustomplot.h.
◆ mRadius
|
protected |
Definition at line 7205 of file qcustomplot.h.
◆ mRange
|
protected |
Definition at line 7199 of file qcustomplot.h.
◆ mRangeDrag
|
protected |
Definition at line 7167 of file qcustomplot.h.
◆ mRangeReversed
|
protected |
Definition at line 7200 of file qcustomplot.h.
◆ mRangeZoom
|
protected |
Definition at line 7168 of file qcustomplot.h.
◆ mRangeZoomFactor
|
protected |
Definition at line 7169 of file qcustomplot.h.
◆ mScaleType
|
protected |
Definition at line 7201 of file qcustomplot.h.
◆ mSelectableParts
|
protected |
Definition at line 7175 of file qcustomplot.h.
◆ mSelectedBasePen
|
protected |
Definition at line 7176 of file qcustomplot.h.
◆ mSelectedLabelColor
|
protected |
Definition at line 7181 of file qcustomplot.h.
◆ mSelectedLabelFont
|
protected |
Definition at line 7180 of file qcustomplot.h.
◆ mSelectedParts
|
protected |
Definition at line 7175 of file qcustomplot.h.
◆ mSelectedSubTickPen
|
protected |
Definition at line 7197 of file qcustomplot.h.
◆ mSelectedTickLabelColor
|
protected |
Definition at line 7187 of file qcustomplot.h.
◆ mSelectedTickLabelFont
|
protected |
Definition at line 7186 of file qcustomplot.h.
◆ mSelectedTickPen
|
protected |
Definition at line 7196 of file qcustomplot.h.
◆ mSubTickLengthIn
|
protected |
Definition at line 7195 of file qcustomplot.h.
◆ mSubTickLengthOut
|
protected |
Definition at line 7195 of file qcustomplot.h.
◆ mSubTickPen
|
protected |
Definition at line 7197 of file qcustomplot.h.
◆ mSubTicks
|
protected |
Definition at line 7194 of file qcustomplot.h.
◆ mSubTickVector
|
protected |
Definition at line 7209 of file qcustomplot.h.
◆ mTicker
|
protected |
Definition at line 7206 of file qcustomplot.h.
◆ mTickLabelColor
|
protected |
Definition at line 7187 of file qcustomplot.h.
◆ mTickLabelFont
|
protected |
Definition at line 7186 of file qcustomplot.h.
◆ mTickLabels
|
protected |
Definition at line 7184 of file qcustomplot.h.
◆ mTickLengthIn
|
protected |
Definition at line 7195 of file qcustomplot.h.
◆ mTickLengthOut
|
protected |
Definition at line 7195 of file qcustomplot.h.
◆ mTickPen
|
protected |
Definition at line 7196 of file qcustomplot.h.
◆ mTicks
|
protected |
Definition at line 7193 of file qcustomplot.h.
◆ mTickVector
|
protected |
Definition at line 7207 of file qcustomplot.h.
◆ mTickVectorLabels
Definition at line 7208 of file qcustomplot.h.
The documentation for this class was generated from the following files:
Documentation copyright © 1996-2024 The KDE developers.
Generated on Sat Dec 21 2024 17:04:48 by doxygen 1.12.0 written by Dimitri van Heesch, © 1997-2006
KDE's Doxygen guidelines are available online.