KDirWatch

Search for usage in LXR

#include <KDirWatch>

Inheritance diagram for KDirWatch:

Public Types

enum  Method { INotify , Stat , QFSWatch }
 
enum  WatchMode { WatchDirOnly = 0 , WatchFiles = 0x01 , WatchSubDirs = 0x02 }
 
typedef QFlags< WatchModeWatchModes
 
- Public Types inherited from QObject
typedef  QObjectList
 

Signals

void created (const QString &path)
 
void deleted (const QString &path)
 
void dirty (const QString &path)
 

Public Slots

void setCreated (const QString &path)
 
void setDeleted (const QString &path)
 
void setDirty (const QString &path)
 

Public Member Functions

 KDirWatch (QObject *parent=nullptr)
 
 ~KDirWatch () override
 
void addDir (const QString &path, WatchModes watchModes=WatchDirOnly)
 
void addFile (const QString &file)
 
bool contains (const QString &path) const
 
QDateTime ctime (const QString &path) const
 
bool event (QEvent *event) override
 
Method internalMethod () const
 
bool isStopped ()
 
void removeDir (const QString &path)
 
void removeFile (const QString &file)
 
bool restartDirScan (const QString &path)
 
void startScan (bool notify=false, bool skippedToo=false)
 
bool stopDirScan (const QString &path)
 
void stopScan ()
 
- Public Member Functions inherited from QObject
 QObject (QObject *parent)
 
QBindable< QStringbindableObjectName ()
 
bool blockSignals (bool block)
 
const QObjectListchildren () const const
 
QMetaObject::Connection connect (const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const const
 
void deleteLater ()
 
void destroyed (QObject *obj)
 
bool disconnect (const char *signal, const QObject *receiver, const char *method) const const
 
bool disconnect (const QObject *receiver, const char *method) const const
 
void dumpObjectInfo () const const
 
void dumpObjectTree () const const
 
QList< QByteArraydynamicPropertyNames () const const
 
virtual bool eventFilter (QObject *watched, QEvent *event)
 
findChild (const QString &name, Qt::FindChildOptions options) const const
 
QList< T > findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const
 
QList< T > findChildren (const QString &name, Qt::FindChildOptions options) const const
 
QList< T > findChildren (Qt::FindChildOptions options) const const
 
bool inherits (const char *className) const const
 
void installEventFilter (QObject *filterObj)
 
bool isQuickItemType () const const
 
bool isWidgetType () const const
 
bool isWindowType () const const
 
void killTimer (int id)
 
virtual const QMetaObjectmetaObject () const const
 
void moveToThread (QThread *targetThread)
 
QString objectName () const const
 
void objectNameChanged (const QString &objectName)
 
QObjectparent () const const
 
QVariant property (const char *name) const const
 
 Q_CLASSINFO (Name, Value)
 
 Q_EMIT Q_EMIT
 
 Q_ENUM (...)
 
 Q_ENUM_NS (...)
 
 Q_ENUMS (...)
 
 Q_FLAG (...)
 
 Q_FLAG_NS (...)
 
 Q_FLAGS (...)
 
 Q_GADGET Q_GADGET
 
 Q_GADGET_EXPORT (EXPORT_MACRO)
 
 Q_INTERFACES (...)
 
 Q_INVOKABLE Q_INVOKABLE
 
 Q_MOC_INCLUDE Q_MOC_INCLUDE
 
 Q_NAMESPACE Q_NAMESPACE
 
 Q_NAMESPACE_EXPORT (EXPORT_MACRO)
 
 Q_OBJECT Q_OBJECT
 
 Q_PROPERTY (...)
 
 Q_REVISION Q_REVISION
 
 Q_SET_OBJECT_NAME (Object)
 
 Q_SIGNAL Q_SIGNAL
 
 Q_SIGNALS Q_SIGNALS
 
 Q_SLOT Q_SLOT
 
 Q_SLOTS Q_SLOTS
 
qobject_cast (const QObject *object)
 
qobject_cast (QObject *object)
 
 QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT
 
void removeEventFilter (QObject *obj)
 
void setObjectName (const QString &name)
 
void setObjectName (QAnyStringView name)
 
void setParent (QObject *parent)
 
bool setProperty (const char *name, const QVariant &value)
 
bool setProperty (const char *name, QVariant &&value)
 
bool signalsBlocked () const const
 
int startTimer (int interval, Qt::TimerType timerType)
 
int startTimer (std::chrono::milliseconds interval, Qt::TimerType timerType)
 
QThreadthread () const const
 

Static Public Member Functions

static bool exists ()
 
static KDirWatchself ()
 
- Static Public Member Functions inherited from QObject
QMetaObject::Connection connect (const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, const QObject *context, Functor functor, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)
 
bool disconnect (const QMetaObject::Connection &connection)
 
bool disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *method)
 
bool disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method)
 
bool disconnect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method)
 
QString tr (const char *sourceText, const char *disambiguation, int n)
 

Additional Inherited Members

- Properties inherited from QObject
 objectName
 
- Protected Member Functions inherited from QObject
virtual void childEvent (QChildEvent *event)
 
virtual void connectNotify (const QMetaMethod &signal)
 
virtual void customEvent (QEvent *event)
 
virtual void disconnectNotify (const QMetaMethod &signal)
 
bool isSignalConnected (const QMetaMethod &signal) const const
 
int receivers (const char *signal) const const
 
QObjectsender () const const
 
int senderSignalIndex () const const
 
virtual void timerEvent (QTimerEvent *event)
 

Detailed Description

Class for watching directory and file changes.

Watch directories and files for changes. The watched directories or files don't have to exist yet.

When a watched directory is changed, i.e. when files therein are created or deleted, KDirWatch will emit the signal dirty().

When a watched, but previously not existing directory gets created, KDirWatch will emit the signal created().

When a watched directory gets deleted, KDirWatch will emit the signal deleted(). The directory is still watched for new creation.

When a watched file is changed, i.e. attributes changed or written to, KDirWatch will emit the signal dirty().

Scanning of particular directories or files can be stopped temporarily and restarted. The whole class can be stopped and restarted. Directories and files can be added/removed from the list in any state.

The implementation uses the INOTIFY functionality on LINUX. As a last resort, a regular polling for change of modification times is done; the polling interval is a global config option: DirWatch/PollInterval and DirWatch/NFSPollInterval for NFS mounted directories. The choice of implementation can be adjusted by the user, with the key [DirWatch] PreferredMethod={Stat|QFSWatch|inotify}

See also
self()
Author
Sven Radej (in 1998)

Definition at line 55 of file kdirwatch.h.

Member Typedef Documentation

◆ WatchModes

Stores a combination of WatchMode values.

Definition at line 72 of file kdirwatch.h.

Member Enumeration Documentation

◆ Method

enum KDirWatch::Method

Definition at line 209 of file kdirwatch.h.

◆ WatchMode

Available watch modes for directory monitoring.

See also
WatchModes
Enumerator
WatchDirOnly 

Watch just the specified directory.

WatchFiles 

Watch also all files contained by the directory.

WatchSubDirs 

Watch also all the subdirs contained by the directory.

Definition at line 64 of file kdirwatch.h.

Constructor & Destructor Documentation

◆ KDirWatch()

KDirWatch::KDirWatch ( QObject * parent = nullptr)
explicit

Constructor.

Scanning begins immediately when a dir/file watch is added.

Parameters
parentthe parent of the QObject (or nullptr for parent-less KDataTools)

Definition at line 1623 of file kdirwatch.cpp.

◆ ~KDirWatch()

KDirWatch::~KDirWatch ( )
override

Destructor.

Stops scanning and cleans up.

Definition at line 1633 of file kdirwatch.cpp.

Member Function Documentation

◆ addDir()

void KDirWatch::addDir ( const QString & path,
WatchModes watchModes = WatchDirOnly )

Adds a directory to be watched.

The directory does not have to exist. When watchModes is set to WatchDirOnly (the default), the signals dirty(), created(), deleted() can be emitted, all for the watched directory. When watchModes is set to WatchFiles, all files in the watched directory are watched for changes, too. Thus, the signals dirty(), created(), deleted() can be emitted. When watchModes is set to WatchSubDirs, all subdirs are watched using the same flags specified in watchModes (symlinks aren't followed). If the path points to a symlink to a directory, the target directory is watched instead. If you want to watch the link, use addFile().

Parameters
paththe path to watch
watchModeswatch modes
See also
KDirWatch::WatchMode

Definition at line 1641 of file kdirwatch.cpp.

◆ addFile()

void KDirWatch::addFile ( const QString & file)

Adds a file to be watched.

If it's a symlink to a directory, it watches the symlink itself.

Parameters
filethe file to watch

Definition at line 1652 of file kdirwatch.cpp.

◆ contains()

bool KDirWatch::contains ( const QString & path) const

Check if a directory is being watched by this KDirWatch instance.

Parameters
paththe directory to check
Returns
true if the directory is being watched

Definition at line 1735 of file kdirwatch.cpp.

◆ created

void KDirWatch::created ( const QString & path)
signal

Emitted when a file or directory (being watched explicitly) is created.

This is not emitted when creating a file is created in a watched directory.

Parameters
paththe path of the file or directory

◆ ctime()

QDateTime KDirWatch::ctime ( const QString & path) const

Returns the time the directory/file was last changed.

Parameters
paththe file to check
Returns
the date of the last modification

Definition at line 1665 of file kdirwatch.cpp.

◆ deleted

void KDirWatch::deleted ( const QString & path)
signal

Emitted when a file or directory is deleted.

The object is still watched for new creation.

Parameters
paththe path of the file or directory

◆ dirty

void KDirWatch::dirty ( const QString & path)
signal

Emitted when a watched object is changed.

For a directory this signal is emitted when files therein are created or deleted. For a file this signal is emitted when its size or attributes change.

When you watch a directory, changes in the size or attributes of contained files may or may not trigger this signal to be emitted depending on which backend is used by KDirWatch.

The new ctime is set before the signal is emitted.

Parameters
paththe path of the file or directory

◆ event()

bool KDirWatch::event ( QEvent * event)
overridevirtual

Trivial override.

See QObject::event.

Reimplemented from QObject.

Definition at line 1801 of file kdirwatch.cpp.

◆ exists()

bool KDirWatch::exists ( )
static

Returns true if there is an instance of KDirWatch.

Returns
true if there is an instance of KDirWatch.
See also
KDirWatch::self()

Definition at line 1618 of file kdirwatch.cpp.

◆ internalMethod()

KDirWatch::Method KDirWatch::internalMethod ( ) const

Returns the preferred internal method to watch for changes.

Definition at line 1768 of file kdirwatch.cpp.

◆ isStopped()

bool KDirWatch::isStopped ( )

Is scanning stopped? After creation of a KDirWatch instance, this is false.

Returns
true when scanning stopped

Definition at line 1722 of file kdirwatch.cpp.

◆ removeDir()

void KDirWatch::removeDir ( const QString & path)

Removes a directory from the list of scanned directories.

If specified path is not in the list this does nothing.

Parameters
paththe path of the dir to be removed from the list

Definition at line 1676 of file kdirwatch.cpp.

◆ removeFile()

void KDirWatch::removeFile ( const QString & file)

Removes a file from the list of watched files.

If specified path is not in the list this does nothing.

Parameters
filethe file to be removed from the list

Definition at line 1683 of file kdirwatch.cpp.

◆ restartDirScan()

bool KDirWatch::restartDirScan ( const QString & path)

Restarts scanning for specified path.

It doesn't notify about the changes (by emitting a signal). The ctime value is reset.

Call it when you are finished with big operations on that path, and when you have refreshed that path.

Parameters
paththe path to restart scanning
Returns
true if the path is being watched, otherwise false
See also
stopDirScan()

Definition at line 1701 of file kdirwatch.cpp.

◆ self()

KDirWatch * KDirWatch::self ( )
static

The KDirWatch instance usually globally used in an application.

It is automatically deleted when the application exits.

However, you can create an arbitrary number of KDirWatch instances aside from this one - for those you have to take care of memory management.

This function returns an instance of KDirWatch. If there is none, it will be created.

Returns
a KDirWatch instance

Definition at line 1611 of file kdirwatch.cpp.

◆ setCreated

void KDirWatch::setCreated ( const QString & path)
slot

Emits created().

Parameters
paththe path of the file or directory

Definition at line 1751 of file kdirwatch.cpp.

◆ setDeleted

void KDirWatch::setDeleted ( const QString & path)
slot

Emits deleted().

Parameters
paththe path of the file or directory

Definition at line 1762 of file kdirwatch.cpp.

◆ setDirty

void KDirWatch::setDirty ( const QString & path)
slot

Emits dirty().

Parameters
paththe path of the file or directory

Definition at line 1757 of file kdirwatch.cpp.

◆ startScan()

void KDirWatch::startScan ( bool notify = false,
bool skippedToo = false )

Starts scanning of all dirs in list.

Parameters
notifyIf true, all changed directories (since stopScan() call) will be notified for refresh. If notify is false, all ctimes will be reset (except those who are stopped, but only if skippedToo is false) and changed dirs won't be notified. You can start scanning even if the list is empty. First call should be called with false or else all directories in list will be notified.
skippedTooif true, the skipped directories (scanning of which was stopped with stopDirScan() ) will be reset and notified for change. Otherwise, stopped directories will continue to be unnotified.

Definition at line 1727 of file kdirwatch.cpp.

◆ stopDirScan()

bool KDirWatch::stopDirScan ( const QString & path)

Stops scanning the specified path.

The path is not deleted from the internal list, it is just skipped. Call this function when you perform an huge operation on this directory (copy/move big files or many files). When finished, call restartDirScan(path).

Parameters
paththe path to skip
Returns
true if the path is being watched, otherwise false
See also
restartDirScan()

Definition at line 1690 of file kdirwatch.cpp.

◆ stopScan()

void KDirWatch::stopScan ( )

Stops scanning of all directories in internal list.

The timer is stopped, but the list is not cleared.

Definition at line 1714 of file kdirwatch.cpp.


The documentation for this class was generated from the following files:
This file is part of the KDE documentation.
Documentation copyright © 1996-2024 The KDE developers.
Generated on Sat Dec 21 2024 17:04:24 by doxygen 1.12.0 written by Dimitri van Heesch, © 1997-2006

KDE's Doxygen guidelines are available online.