KChart::PolarCoordinatePlane

Search for usage in LXR

#include <KChartPolarCoordinatePlane.h>

Inheritance diagram for KChart::PolarCoordinatePlane:

Public Types

typedef QList< CoordinateTransformationCoordinateTransformationList
 
- Public Types inherited from KChart::AbstractCoordinatePlane
enum  AxesCalcMode { Linear , Logarithmic }
 
- Public Types inherited from QObject
typedef  QObjectList
 

Public Member Functions

 PolarCoordinatePlane (Chart *parent=nullptr)
 
void addDiagram (AbstractDiagram *diagram) override
 
qreal angleUnit () const
 
const GridAttributes gridAttributes (bool circular) const
 
bool hasOwnGridAttributes (bool circular) const
 
void paint (QPainter *) override
 
qreal radiusUnit () const
 
void resetGridAttributes (bool circular)
 
void setGridAttributes (bool circular, const GridAttributes &)
 
void setStartPosition (qreal degrees)
 
void setZoomCenter (const QPointF &center) override
 
void setZoomFactors (qreal factorX, qreal factorY) override
 
void setZoomFactorX (qreal factor) override
 
void setZoomFactorY (qreal factor) override
 
qreal startPosition () const
 
const QPointF translate (const QPointF &diagramPoint) const override
 
const QPointF translatePolar (const QPointF &diagramPoint) const
 
QPointF zoomCenter () const override
 
qreal zoomFactorX () const override
 
qreal zoomFactorY () const override
 
- Public Member Functions inherited from KChart::AbstractCoordinatePlane
AbstractDiagramdiagram ()
 
AbstractDiagramList diagrams ()
 
ConstAbstractDiagramList diagrams () const
 
Qt::Orientations expandingDirections () const override
 
QRect geometry () const override
 
GridAttributes globalGridAttributes () const
 
DataDimensionsList gridDimensionsList ()
 
bool isCornerSpacersEnabled () const
 
bool isEmpty () const override
 
bool isRubberBandZoomingEnabled () const
 
bool isVisiblePoint (const QPointF &point) const
 
QSize maximumSize () const override
 
QSize minimumSize () const override
 
virtual void mouseDoubleClickEvent (QMouseEvent *event)
 
virtual void mouseMoveEvent (QMouseEvent *event)
 
virtual void mousePressEvent (QMouseEvent *event)
 
virtual void mouseReleaseEvent (QMouseEvent *event)
 
Chartparent ()
 
const Chartparent () const
 
AbstractCoordinatePlanereferenceCoordinatePlane () const
 
virtual void replaceDiagram (AbstractDiagram *diagram, AbstractDiagram *oldDiagram=nullptr)
 
void setCornerSpacersEnabled (bool enable)
 
void setGeometry (const QRect &r) override
 
void setGlobalGridAttributes (const GridAttributes &)
 
void setParent (Chart *parent)
 
void setReferenceCoordinatePlane (AbstractCoordinatePlane *plane)
 
void setRubberBandZoomingEnabled (bool enable)
 
virtual AbstractCoordinatePlanesharedAxisMasterPlane (QPainter *p=nullptr)
 
QSize sizeHint () const override
 
virtual void takeDiagram (AbstractDiagram *diagram)
 
- Public Member Functions inherited from KChart::AbstractArea
virtual int bottomOverlap (bool doNotRecalculate=false) const
 
virtual int leftOverlap (bool doNotRecalculate=false) const
 
void paintAll (QPainter &painter) override
 
virtual void paintIntoRect (QPainter &painter, const QRect &rect)
 
virtual int rightOverlap (bool doNotRecalculate=false) const
 
virtual int topOverlap (bool doNotRecalculate=false) const
 
- Public Member Functions inherited from QObject
 QObject (QObject *parent)
 
QBindable< QStringbindableObjectName ()
 
bool blockSignals (bool block)
 
const QObjectListchildren () const const
 
QMetaObject::Connection connect (const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const const
 
void deleteLater ()
 
void destroyed (QObject *obj)
 
bool disconnect (const char *signal, const QObject *receiver, const char *method) const const
 
bool disconnect (const QObject *receiver, const char *method) const const
 
void dumpObjectInfo () const const
 
void dumpObjectTree () const const
 
QList< QByteArraydynamicPropertyNames () const const
 
virtual bool event (QEvent *e)
 
virtual bool eventFilter (QObject *watched, QEvent *event)
 
findChild (const QString &name, Qt::FindChildOptions options) const const
 
QList< T > findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const
 
QList< T > findChildren (const QString &name, Qt::FindChildOptions options) const const
 
QList< T > findChildren (Qt::FindChildOptions options) const const
 
bool inherits (const char *className) const const
 
void installEventFilter (QObject *filterObj)
 
bool isQuickItemType () const const
 
bool isWidgetType () const const
 
bool isWindowType () const const
 
void killTimer (int id)
 
virtual const QMetaObjectmetaObject () const const
 
void moveToThread (QThread *targetThread)
 
QString objectName () const const
 
void objectNameChanged (const QString &objectName)
 
QObjectparent () const const
 
QVariant property (const char *name) const const
 
 Q_CLASSINFO (Name, Value)
 
 Q_EMIT Q_EMIT
 
 Q_ENUM (...)
 
 Q_ENUM_NS (...)
 
 Q_ENUMS (...)
 
 Q_FLAG (...)
 
 Q_FLAG_NS (...)
 
 Q_FLAGS (...)
 
 Q_GADGET Q_GADGET
 
 Q_GADGET_EXPORT (EXPORT_MACRO)
 
 Q_INTERFACES (...)
 
 Q_INVOKABLE Q_INVOKABLE
 
 Q_MOC_INCLUDE Q_MOC_INCLUDE
 
 Q_NAMESPACE Q_NAMESPACE
 
 Q_NAMESPACE_EXPORT (EXPORT_MACRO)
 
 Q_OBJECT Q_OBJECT
 
 Q_PROPERTY (...)
 
 Q_REVISION Q_REVISION
 
 Q_SET_OBJECT_NAME (Object)
 
 Q_SIGNAL Q_SIGNAL
 
 Q_SIGNALS Q_SIGNALS
 
 Q_SLOT Q_SLOT
 
 Q_SLOTS Q_SLOTS
 
qobject_cast (const QObject *object)
 
qobject_cast (QObject *object)
 
 QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT
 
void removeEventFilter (QObject *obj)
 
void setObjectName (const QString &name)
 
void setObjectName (QAnyStringView name)
 
void setParent (QObject *parent)
 
bool setProperty (const char *name, const QVariant &value)
 
bool setProperty (const char *name, QVariant &&value)
 
bool signalsBlocked () const const
 
int startTimer (int interval, Qt::TimerType timerType)
 
int startTimer (std::chrono::milliseconds interval, Qt::TimerType timerType)
 
QThreadthread () const const
 
- Public Member Functions inherited from KChart::AbstractAreaBase
void alignToReferencePoint (const RelativePosition &position)
 
BackgroundAttributes backgroundAttributes () const
 
bool compare (const AbstractAreaBase *other) const
 
FrameAttributes frameAttributes () const
 
void getFrameLeadings (int &left, int &top, int &right, int &bottom) const
 
virtual void paintBackground (QPainter &painter, const QRect &rectangle)
 
virtual void paintFrame (QPainter &painter, const QRect &rectangle)
 
void setBackgroundAttributes (const BackgroundAttributes &a)
 
void setFrameAttributes (const FrameAttributes &a)
 
- Public Member Functions inherited from KChart::AbstractLayoutItem
 AbstractLayoutItem (Qt::Alignment itemAlignment=Qt::Alignment())
 
virtual void paintCtx (PaintContext *context)
 
QLayoutparentLayout ()
 
void removeFromParentLayout ()
 
void setParentLayout (QLayout *lay)
 
virtual void setParentWidget (QWidget *widget)
 
virtual void sizeHintChanged () const
 
- Public Member Functions inherited from QLayoutItem
 QLayoutItem (Qt::Alignment alignment)
 
Qt::Alignment alignment () const const
 
virtual QSizePolicy::ControlTypes controlTypes () const const
 
virtual bool hasHeightForWidth () const const
 
virtual int heightForWidth (int) const const
 
virtual void invalidate ()
 
virtual QLayoutlayout ()
 
virtual int minimumHeightForWidth (int w) const const
 
void setAlignment (Qt::Alignment alignment)
 
virtual QSpacerItemspacerItem ()
 
virtual QWidgetwidget () const const
 

Protected Slots

void adjustZoomAndRepaint ()
 
void slotLayoutChanged (KChart::AbstractDiagram *diagram)
 

Protected Member Functions

DataDimensionsList getDataDimensionsList () const override
 
void layoutDiagrams () override
 
void paintEvent (QPaintEvent *)
 
void resizeEvent (QResizeEvent *)
 
- Protected Member Functions inherited from KChart::AbstractCoordinatePlane
 AbstractCoordinatePlane (Chart *parent=nullptr)
 
- Protected Member Functions inherited from KChart::AbstractArea
QRect areaGeometry () const override
 
void positionHasChanged () override
 
- Protected Member Functions inherited from QObject
virtual void childEvent (QChildEvent *event)
 
virtual void connectNotify (const QMetaMethod &signal)
 
virtual void customEvent (QEvent *event)
 
virtual void disconnectNotify (const QMetaMethod &signal)
 
bool isSignalConnected (const QMetaMethod &signal) const const
 
int receivers (const char *signal) const const
 
QObjectsender () const const
 
int senderSignalIndex () const const
 
virtual void timerEvent (QTimerEvent *event)
 
- Protected Member Functions inherited from KChart::AbstractAreaBase
QRect innerRect () const
 

Additional Inherited Members

- Properties inherited from QObject
 objectName
 
- Signals inherited from KChart::AbstractCoordinatePlane
void boundariesChanged ()
 
void destroyedCoordinatePlane (KChart::AbstractCoordinatePlane *)
 
void geometryChanged (QRect, QRect)
 
void internal_geometryChanged (QRect, QRect)
 
void needLayoutPlanes ()
 
void needRelayout ()
 
void needUpdate ()
 
void propertiesChanged ()
 
void viewportCoordinateSystemChanged ()
 
- Signals inherited from KChart::AbstractArea
void positionChanged (KChart::AbstractArea *)
 
- Public Slots inherited from KChart::AbstractCoordinatePlane
void layoutPlanes ()
 
void relayout ()
 
void setGridNeedsRecalculate ()
 
void update ()
 
- Static Public Member Functions inherited from QObject
QMetaObject::Connection connect (const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, const QObject *context, Functor functor, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)
 
bool disconnect (const QMetaObject::Connection &connection)
 
bool disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *method)
 
bool disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method)
 
bool disconnect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method)
 
QString tr (const char *sourceText, const char *disambiguation, int n)
 
- Static Public Member Functions inherited from KChart::AbstractAreaBase
static void paintBackgroundAttributes (QPainter &painter, const QRect &rectangle, const KChart::BackgroundAttributes &attributes)
 
static void paintFrameAttributes (QPainter &painter, const QRect &rectangle, const KChart::FrameAttributes &attributes)
 
- Protected Attributes inherited from KChart::AbstractLayoutItem
QWidgetmParent
 
QLayoutmParentLayout
 

Detailed Description

Polar coordinate plane.

Definition at line 22 of file KChartPolarCoordinatePlane.h.

Member Typedef Documentation

◆ CoordinateTransformationList

Constructor & Destructor Documentation

◆ PolarCoordinatePlane()

PolarCoordinatePlane::PolarCoordinatePlane ( Chart * parent = nullptr)
explicit

Definition at line 31 of file KChartPolarCoordinatePlane.cpp.

◆ ~PolarCoordinatePlane()

PolarCoordinatePlane::~PolarCoordinatePlane ( )
override

Definition at line 37 of file KChartPolarCoordinatePlane.cpp.

Member Function Documentation

◆ addDiagram()

void PolarCoordinatePlane::addDiagram ( AbstractDiagram * diagram)
overridevirtual

Adds a diagram to this coordinate plane.

Parameters
diagramThe diagram to add.
See also
replaceDiagram, takeDiagram

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 47 of file KChartPolarCoordinatePlane.cpp.

◆ adjustZoomAndRepaint

void PolarCoordinatePlane::adjustZoomAndRepaint ( )
protectedslot

Definition at line 120 of file KChartPolarCoordinatePlane.cpp.

◆ angleUnit()

qreal PolarCoordinatePlane::angleUnit ( ) const

Definition at line 194 of file KChartPolarCoordinatePlane.cpp.

◆ getDataDimensionsList()

DataDimensionsList PolarCoordinatePlane::getDataDimensionsList ( ) const
overrideprotectedvirtual

Implements KChart::AbstractCoordinatePlane.

Definition at line 294 of file KChartPolarCoordinatePlane.cpp.

◆ gridAttributes()

const GridAttributes KChart::PolarCoordinatePlane::gridAttributes ( bool circular) const
Returns
The attributes used for grid lines drawn in circular direction (or in sagittal direction, resp.).
Note
This function always returns a valid set of grid attributes: If no special grid attributes were set for this direction the global attributes are returned, as returned by AbstractCoordinatePlane::globalGridAttributes.
See also
setGridAttributes
resetGridAttributes
AbstractCoordinatePlane::globalGridAttributes
hasOwnGridAttributes

Definition at line 323 of file KChartPolarCoordinatePlane.cpp.

◆ hasOwnGridAttributes()

bool KChart::PolarCoordinatePlane::hasOwnGridAttributes ( bool circular) const
Returns
Returns whether the grid attributes have been set for the respective direction via setGridAttributes( bool circular ).

If false, the grid will use the global attributes set by AbstractCoordinatePlane::globalGridAttributes (or the default attributes, resp.)

See also
setGridAttributes
resetGridAttributes
AbstractCoordinatePlane::globalGridAttributes

Definition at line 358 of file KChartPolarCoordinatePlane.cpp.

◆ layoutDiagrams()

void PolarCoordinatePlane::layoutDiagrams ( )
overrideprotectedvirtual

Distribute the available space among the diagrams and axes.

Implements KChart::AbstractCoordinatePlane.

Definition at line 134 of file KChartPolarCoordinatePlane.cpp.

◆ paint()

void PolarCoordinatePlane::paint ( QPainter * painter)
overridevirtual

reimpl

Implements KChart::AbstractLayoutItem.

Definition at line 58 of file KChartPolarCoordinatePlane.cpp.

◆ radiusUnit()

qreal PolarCoordinatePlane::radiusUnit ( ) const

Definition at line 201 of file KChartPolarCoordinatePlane.cpp.

◆ resetGridAttributes()

void KChart::PolarCoordinatePlane::resetGridAttributes ( bool circular)

Reset the attributes to be used for grid lines drawn in circular direction (or in sagittal direction, resp.).

By calling this method you specify that the global attributes set by AbstractCoordinatePlane::setGlobalGridAttributes be used.

See also
setGridAttributes, gridAttributes
AbstractCoordinatePlane::globalGridAttributes
hasOwnGridAttributes

Definition at line 316 of file KChartPolarCoordinatePlane.cpp.

◆ resizeEvent()

void PolarCoordinatePlane::resizeEvent ( QResizeEvent * )
protected

Definition at line 128 of file KChartPolarCoordinatePlane.cpp.

◆ setGridAttributes()

void KChart::PolarCoordinatePlane::setGridAttributes ( bool circular,
const GridAttributes & a )

Set the attributes to be used for grid lines drawn in circular direction (or in sagittal direction, resp.).

To disable circular grid painting, for example, your code should like this:

GridAttributes ga = plane->gridAttributes( bool );
ga.setGridVisible( false );
plane-setGridAttributes( bool, ga );
A set of attributes controlling the appearance of grids.
void setGridAttributes(bool circular, const GridAttributes &)
Set the attributes to be used for grid lines drawn in circular direction (or in sagittal direction,...
Note
setGridAttributes overwrites the global attributes that were set by AbstractCoordinatePlane::setGlobalGridAttributes. To re-activate these global attributes you can call resetGridAttributes.
See also
resetGridAttributes, gridAttributes
AbstractCoordinatePlane::setGlobalGridAttributes
hasOwnGridAttributes

Definition at line 303 of file KChartPolarCoordinatePlane.cpp.

◆ setStartPosition()

void PolarCoordinatePlane::setStartPosition ( qreal degrees)

Specify the rotation of the coordinate plane.

In a pie diagram this indicates the position where the first pie starts, in a polar diagram it specifies the Zero position of the circular axis:

Illustration of "start position" property
See also
startPosition

Definition at line 213 of file KChartPolarCoordinatePlane.cpp.

◆ setZoomCenter()

void PolarCoordinatePlane::setZoomCenter ( const QPointF & center)
overridevirtual

Set the point (in value coordinates) to be used as the center point in zoom operations.

Parameters
centerThe point to use.

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 282 of file KChartPolarCoordinatePlane.cpp.

◆ setZoomFactors()

void PolarCoordinatePlane::setZoomFactors ( qreal factorX,
qreal factorY )
overridevirtual

Sets both zoom factors in one go.

See also
setZoomFactorX,setZoomFactorY

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 247 of file KChartPolarCoordinatePlane.cpp.

◆ setZoomFactorX()

void PolarCoordinatePlane::setZoomFactorX ( qreal factor)
overridevirtual

Sets the zoom factor in horizontal direction, that is applied to all coordinate transformations.

Parameters
factorThe new zoom factor

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 253 of file KChartPolarCoordinatePlane.cpp.

◆ setZoomFactorY()

void PolarCoordinatePlane::setZoomFactorY ( qreal factor)
overridevirtual

Sets the zoom factor in vertical direction, that is applied to all coordinate transformations.

Parameters
factorThe new zoom factor

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 264 of file KChartPolarCoordinatePlane.cpp.

◆ slotLayoutChanged

void PolarCoordinatePlane::slotLayoutChanged ( KChart::AbstractDiagram * diagram)
protectedslot

Definition at line 208 of file KChartPolarCoordinatePlane.cpp.

◆ startPosition()

qreal PolarCoordinatePlane::startPosition ( ) const

Retrieve the rotation of the coordinate plane.

See also
setStartPosition

Definition at line 226 of file KChartPolarCoordinatePlane.cpp.

◆ translate()

const QPointF PolarCoordinatePlane::translate ( const QPointF & diagramPoint) const
overridevirtual

Translate the given point in value space coordinates to a position in pixel space.

Parameters
diagramPointThe point in value coordinates.
Returns
The translated point.

Implements KChart::AbstractCoordinatePlane.

Definition at line 180 of file KChartPolarCoordinatePlane.cpp.

◆ translatePolar()

const QPointF PolarCoordinatePlane::translatePolar ( const QPointF & diagramPoint) const

Definition at line 187 of file KChartPolarCoordinatePlane.cpp.

◆ zoomCenter()

QPointF PolarCoordinatePlane::zoomCenter ( ) const
overridevirtual
Returns
The center point (in value coordinates) of the coordinate plane, that is used for zoom operations.

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 275 of file KChartPolarCoordinatePlane.cpp.

◆ zoomFactorX()

qreal PolarCoordinatePlane::zoomFactorX ( ) const
overridevirtual
Returns
The zoom factor in horizontal direction, that is applied to all coordinate transformations.

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 233 of file KChartPolarCoordinatePlane.cpp.

◆ zoomFactorY()

qreal PolarCoordinatePlane::zoomFactorY ( ) const
overridevirtual
Returns
The zoom factor in vertical direction, that is applied to all coordinate transformations.

Reimplemented from KChart::AbstractCoordinatePlane.

Definition at line 240 of file KChartPolarCoordinatePlane.cpp.


The documentation for this class was generated from the following files:
This file is part of the KDE documentation.
Documentation copyright © 1996-2024 The KDE developers.
Generated on Sat Dec 21 2024 17:02:46 by doxygen 1.12.0 written by Dimitri van Heesch, © 1997-2006

KDE's Doxygen guidelines are available online.