QCPLayout

Search for usage in LXR

Inheritance diagram for QCPLayout:

Public Member Functions

 QCPLayout ()
 
void clear ()
 
virtual QCPLayoutElementelementAt (int index) const =0
 
virtual int elementCount () const =0
 
virtual QList< QCPLayoutElement * > elements (bool recursive) const override
 
bool remove (QCPLayoutElement *element)
 
bool removeAt (int index)
 
virtual void simplify ()
 
virtual bool take (QCPLayoutElement *element)=0
 
virtual QCPLayoutElementtakeAt (int index)=0
 
virtual void update (UpdatePhase phase) override
 
- Public Member Functions inherited from QCPLayoutElement
 QCPLayoutElement (QCustomPlot *parentPlot=nullptr)
 
QCP::MarginSides autoMargins () const
 
QCPLayoutlayout () const
 
QCPMarginGroupmarginGroup (QCP::MarginSide side) const
 
QHash< QCP::MarginSide, QCPMarginGroup * > marginGroups () const
 
QMargins margins () const
 
virtual QSize maximumOuterSizeHint () const
 
QSize maximumSize () const
 
QMargins minimumMargins () const
 
virtual QSize minimumOuterSizeHint () const
 
QSize minimumSize () const
 
QRect outerRect () const
 
QRect rect () const
 
virtual double selectTest (const QPointF &pos, bool onlySelectable, QVariant *details=nullptr) const override
 
void setAutoMargins (QCP::MarginSides sides)
 
void setMarginGroup (QCP::MarginSides sides, QCPMarginGroup *group)
 
void setMargins (const QMargins &margins)
 
void setMaximumSize (const QSize &size)
 
void setMaximumSize (int width, int height)
 
void setMinimumMargins (const QMargins &margins)
 
void setMinimumSize (const QSize &size)
 
void setMinimumSize (int width, int height)
 
void setOuterRect (const QRect &rect)
 
void setSizeConstraintRect (SizeConstraintRect constraintRect)
 
SizeConstraintRect sizeConstraintRect () const
 
- Public Member Functions inherited from QCPLayerable
 QCPLayerable (QCustomPlot *plot, QString targetLayer=QString(), QCPLayerable *parentLayerable=nullptr)
 
bool antialiased () const
 
QCPLayerlayer () const
 
QCPLayerableparentLayerable () const
 
QCustomPlotparentPlot () const
 
bool realVisibility () const
 
void setAntialiased (bool enabled)
 
bool setLayer (const QString &layerName)
 
Q_SLOT bool setLayer (QCPLayer *layer)
 
void setVisible (bool on)
 
bool visible () const
 
- Public Member Functions inherited from QObject
 QObject (QObject *parent)
 
QBindable< QStringbindableObjectName ()
 
bool blockSignals (bool block)
 
const QObjectListchildren () const const
 
QMetaObject::Connection connect (const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const const
 
void deleteLater ()
 
void destroyed (QObject *obj)
 
bool disconnect (const char *signal, const QObject *receiver, const char *method) const const
 
bool disconnect (const QObject *receiver, const char *method) const const
 
void dumpObjectInfo () const const
 
void dumpObjectTree () const const
 
QList< QByteArraydynamicPropertyNames () const const
 
virtual bool event (QEvent *e)
 
virtual bool eventFilter (QObject *watched, QEvent *event)
 
findChild (const QString &name, Qt::FindChildOptions options) const const
 
QList< T > findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const
 
QList< T > findChildren (const QString &name, Qt::FindChildOptions options) const const
 
QList< T > findChildren (Qt::FindChildOptions options) const const
 
bool inherits (const char *className) const const
 
void installEventFilter (QObject *filterObj)
 
bool isQuickItemType () const const
 
bool isWidgetType () const const
 
bool isWindowType () const const
 
void killTimer (int id)
 
virtual const QMetaObjectmetaObject () const const
 
void moveToThread (QThread *targetThread)
 
QString objectName () const const
 
void objectNameChanged (const QString &objectName)
 
QObjectparent () const const
 
QVariant property (const char *name) const const
 
 Q_CLASSINFO (Name, Value)
 
 Q_EMIT Q_EMIT
 
 Q_ENUM (...)
 
 Q_ENUM_NS (...)
 
 Q_ENUMS (...)
 
 Q_FLAG (...)
 
 Q_FLAG_NS (...)
 
 Q_FLAGS (...)
 
 Q_GADGET Q_GADGET
 
 Q_GADGET_EXPORT (EXPORT_MACRO)
 
 Q_INTERFACES (...)
 
 Q_INVOKABLE Q_INVOKABLE
 
 Q_MOC_INCLUDE Q_MOC_INCLUDE
 
 Q_NAMESPACE Q_NAMESPACE
 
 Q_NAMESPACE_EXPORT (EXPORT_MACRO)
 
 Q_OBJECT Q_OBJECT
 
 Q_PROPERTY (...)
 
 Q_REVISION Q_REVISION
 
 Q_SET_OBJECT_NAME (Object)
 
 Q_SIGNAL Q_SIGNAL
 
 Q_SIGNALS Q_SIGNALS
 
 Q_SLOT Q_SLOT
 
 Q_SLOTS Q_SLOTS
 
qobject_cast (const QObject *object)
 
qobject_cast (QObject *object)
 
 QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT
 
void removeEventFilter (QObject *obj)
 
void setObjectName (const QString &name)
 
void setObjectName (QAnyStringView name)
 
void setParent (QObject *parent)
 
bool setProperty (const char *name, const QVariant &value)
 
bool setProperty (const char *name, QVariant &&value)
 
bool signalsBlocked () const const
 
int startTimer (int interval, Qt::TimerType timerType)
 
int startTimer (std::chrono::milliseconds interval, Qt::TimerType timerType)
 
QThreadthread () const const
 

Protected Member Functions

void adoptElement (QCPLayoutElement *el)
 
QVector< int > getSectionSizes (QVector< int > maxSizes, QVector< int > minSizes, QVector< double > stretchFactors, int totalSize) const
 
void releaseElement (QCPLayoutElement *el)
 
void sizeConstraintsChanged () const
 
virtual void updateLayout ()
 
- Protected Member Functions inherited from QCPLayoutElement
virtual void applyDefaultAntialiasingHint (QCPPainter *painter) const override
 
virtual int calculateAutoMargin (QCP::MarginSide side)
 
virtual void draw (QCPPainter *painter) override
 
virtual void layoutChanged ()
 
virtual void parentPlotInitialized (QCustomPlot *parentPlot) override
 
- Protected Member Functions inherited from QCPLayerable
void applyAntialiasingHint (QCPPainter *painter, bool localAntialiased, QCP::AntialiasedElement overrideElement) const
 
virtual QRect clipRect () const
 
virtual void deselectEvent (bool *selectionStateChanged)
 
void initializeParentPlot (QCustomPlot *parentPlot)
 
virtual void mouseDoubleClickEvent (QMouseEvent *event, const QVariant &details)
 
virtual void mouseMoveEvent (QMouseEvent *event, const QPointF &startPos)
 
virtual void mousePressEvent (QMouseEvent *event, const QVariant &details)
 
virtual void mouseReleaseEvent (QMouseEvent *event, const QPointF &startPos)
 
bool moveToLayer (QCPLayer *layer, bool prepend)
 
virtual void selectEvent (QMouseEvent *event, bool additive, const QVariant &details, bool *selectionStateChanged)
 
virtual QCP::Interaction selectionCategory () const
 
void setParentLayerable (QCPLayerable *parentLayerable)
 
virtual void wheelEvent (QWheelEvent *event)
 
- Protected Member Functions inherited from QObject
virtual void childEvent (QChildEvent *event)
 
virtual void connectNotify (const QMetaMethod &signal)
 
virtual void customEvent (QEvent *event)
 
virtual void disconnectNotify (const QMetaMethod &signal)
 
bool isSignalConnected (const QMetaMethod &signal) const const
 
int receivers (const char *signal) const const
 
QObjectsender () const const
 
int senderSignalIndex () const const
 
virtual void timerEvent (QTimerEvent *event)
 

Static Protected Member Functions

static QSize getFinalMaximumOuterSize (const QCPLayoutElement *el)
 
static QSize getFinalMinimumOuterSize (const QCPLayoutElement *el)
 

Additional Inherited Members

- Public Types inherited from QCPLayoutElement
enum  SizeConstraintRect { scrInnerRect , scrOuterRect }
 
enum  UpdatePhase { upPreparation , upMargins , upLayout }
 
- Public Types inherited from QObject
typedef  QObjectList
 
- Properties inherited from QObject
 objectName
 
- Signals inherited from QCPLayerable
void layerChanged (QCPLayer *newLayer)
 
- Static Public Member Functions inherited from QObject
QMetaObject::Connection connect (const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, const QObject *context, Functor functor, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method, Qt::ConnectionType type)
 
QMetaObject::Connection connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)
 
bool disconnect (const QMetaObject::Connection &connection)
 
bool disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *method)
 
bool disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method)
 
bool disconnect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method)
 
QString tr (const char *sourceText, const char *disambiguation, int n)
 
- Protected Attributes inherited from QCPLayoutElement
QCP::MarginSides mAutoMargins
 
QHash< QCP::MarginSide, QCPMarginGroup * > mMarginGroups
 
QMargins mMargins
 
QSize mMaximumSize
 
QMargins mMinimumMargins
 
QSize mMinimumSize
 
QRect mOuterRect
 
QCPLayoutmParentLayout
 
QRect mRect
 
SizeConstraintRect mSizeConstraintRect
 
- Protected Attributes inherited from QCPLayerable
bool mAntialiased
 
QCPLayermLayer
 
QPointer< QCPLayerablemParentLayerable
 
QCustomPlotmParentPlot
 
bool mVisible
 

Detailed Description

The abstract base class for layouts.

This is an abstract base class for layout elements whose main purpose is to define the position and size of other child layout elements. In most cases, layouts don't draw anything themselves (but there are exceptions to this, e.g. QCPLegend).

QCPLayout derives from QCPLayoutElement, and thus can itself be nested in other layouts.

QCPLayout introduces a common interface for accessing and manipulating the child elements. Those functions are most notably elementCount, elementAt, takeAt, take, simplify, removeAt, remove and clear. Individual subclasses may add more functions to this interface which are more specialized to the form of the layout. For example, QCPLayoutGrid adds functions that take row and column indices to access cells of the layout grid more conveniently.

Since this is an abstract base class, you can't instantiate it directly. Rather use one of its subclasses like QCPLayoutGrid or QCPLayoutInset.

For a general introduction to the layout system, see the dedicated documentation page The Layout System.

Definition at line 1341 of file qcustomplot.h.

Constructor & Destructor Documentation

◆ QCPLayout()

QCPLayout::QCPLayout ( )
explicit

Creates an instance of QCPLayout and sets default values. Note that since QCPLayout is an abstract base class, it can't be instantiated directly.

Definition at line 3666 of file qcustomplot.cpp.

Member Function Documentation

◆ adoptElement()

void QCPLayout::adoptElement ( QCPLayoutElement * el)
protected

Associates el with this layout. This is done by setting the QCPLayoutElement::layout, the QCPLayerable::parentLayerable and the QObject parent to this layout.

Further, if el didn't previously have a parent plot, calls QCPLayerable::initializeParentPlot on el to set the paret plot.

This method is used by subclass specific methods that add elements to the layout. Note that this method only changes properties in el. The removal from the old layout and the insertion into the new layout must be done additionally.

Definition at line 3831 of file qcustomplot.cpp.

◆ clear()

void QCPLayout::clear ( )

Removes and deletes all layout elements in this layout. Finally calls simplify to make sure all empty cells are collapsed.

See also
remove, removeAt

Definition at line 3776 of file qcustomplot.cpp.

◆ elementAt()

virtual QCPLayoutElement * QCPLayout::elementAt ( int index) const
pure virtual

Returns the element in the cell with the given index. If index is invalid, returns nullptr.

Note that even if index is valid, the respective cell may be empty in some layouts (e.g. QCPLayoutGrid), so this function may return nullptr in those cases. You may use this function to check whether a cell is empty or not.

See also
elements, elementCount, takeAt

Implemented in QCPLayoutGrid, and QCPLayoutInset.

◆ elementCount()

virtual int QCPLayout::elementCount ( ) const
pure virtual

Returns the number of elements/cells in the layout.

See also
elements, elementAt

Implemented in QCPLayoutGrid, and QCPLayoutInset.

◆ elements()

QList< QCPLayoutElement * > QCPLayout::elements ( bool recursive) const
overridevirtual

Returns a list of all child elements in this layout element. If recursive is true, all sub-child elements are included in the list, too.

Warning
There may be nullptr entries in the returned list. For example, QCPLayoutGrid may have empty cells which yield nullptr at the respective index.

Reimplemented from QCPLayoutElement.

Reimplemented in QCPLayoutGrid.

Definition at line 3697 of file qcustomplot.cpp.

◆ getFinalMaximumOuterSize()

QSize QCPLayout::getFinalMaximumOuterSize ( const QCPLayoutElement * el)
staticprotected

This is a helper function for the implementation of subclasses.

It returns the maximum size that should finally be used for the outer rect of the passed layout element el.

It takes into account whether a manual maximum size is set (QCPLayoutElement::setMaximumSize), which size constraint is set (QCPLayoutElement::setSizeConstraintRect), as well as the maximum size hint, if no manual maximum size was set (QCPLayoutElement::maximumOuterSizeHint).

Definition at line 4045 of file qcustomplot.cpp.

◆ getFinalMinimumOuterSize()

QSize QCPLayout::getFinalMinimumOuterSize ( const QCPLayoutElement * el)
staticprotected

This is a helper function for the implementation of subclasses.

It returns the minimum size that should finally be used for the outer rect of the passed layout element el.

It takes into account whether a manual minimum size is set (QCPLayoutElement::setMinimumSize), which size constraint is set (QCPLayoutElement::setSizeConstraintRect), as well as the minimum size hint, if no manual minimum size was set (QCPLayoutElement::minimumOuterSizeHint).

Definition at line 4020 of file qcustomplot.cpp.

◆ getSectionSizes()

QVector< int > QCPLayout::getSectionSizes ( QVector< int > maxSizes,
QVector< int > minSizes,
QVector< double > stretchFactors,
int totalSize ) const
protected

This is a helper function for the implementation of updateLayout in subclasses.

It calculates the sizes of one-dimensional sections with provided constraints on maximum section sizes, minimum section sizes, relative stretch factors and the final total size of all sections.

The QVector entries refer to the sections. Thus all QVectors must have the same size.

maxSizes gives the maximum allowed size of each section. If there shall be no maximum size imposed, set all vector values to Qt's QWIDGETSIZE_MAX.

minSizes gives the minimum allowed size of each section. If there shall be no minimum size imposed, set all vector values to zero. If the minSizes entries add up to a value greater than totalSize, sections will be scaled smaller than the proposed minimum sizes. (In other words, not exceeding the allowed total size is taken to be more important than not going below minimum section sizes.)

stretchFactors give the relative proportions of the sections to each other. If all sections shall be scaled equally, set all values equal. If the first section shall be double the size of each individual other section, set the first number of stretchFactors to double the value of the other individual values (e.g. {2, 1, 1, 1}).

totalSize is the value that the final section sizes will add up to. Due to rounding, the actual sum may differ slightly. If you want the section sizes to sum up to exactly that value, you could distribute the remaining difference on the sections.

The return value is a QVector containing the section sizes.

Definition at line 3896 of file qcustomplot.cpp.

◆ releaseElement()

void QCPLayout::releaseElement ( QCPLayoutElement * el)
protected

Disassociates el from this layout. This is done by setting the QCPLayoutElement::layout and the QCPLayerable::parentLayerable to zero. The QObject parent is set to the parent QCustomPlot.

This method is used by subclass specific methods that remove elements from the layout (e.g. take or takeAt). Note that this method only changes properties in el. The removal from the old layout must be done additionally.

Definition at line 3855 of file qcustomplot.cpp.

◆ remove()

bool QCPLayout::remove ( QCPLayoutElement * element)

Removes and deletes the provided element. Returns true on success. If element is not in the layout, returns false.

This function internally uses takeAt to remove the element from the layout and then deletes the element. Note that some layouts don't remove the respective cell right away but leave an empty cell after successful removal of the layout element. To collapse empty cells, use simplify.

See also
removeAt, take

Definition at line 3760 of file qcustomplot.cpp.

◆ removeAt()

bool QCPLayout::removeAt ( int index)

Removes and deletes the element at the provided index. Returns true on success. If index is invalid or points to an empty cell, returns false.

This function internally uses takeAt to remove the element from the layout and then deletes the returned element. Note that some layouts don't remove the respective cell right away but leave an empty cell after successful removal of the layout element. To collapse empty cells, use simplify.

See also
remove, takeAt

Definition at line 3739 of file qcustomplot.cpp.

◆ simplify()

void QCPLayout::simplify ( )
virtual

Simplifies the layout by collapsing empty cells. The exact behavior depends on subclasses, the default implementation does nothing.

Not all layouts need simplification. For example, QCPLayoutInset doesn't use explicit simplification while QCPLayoutGrid does.

Reimplemented in QCPLayoutGrid, and QCPLayoutInset.

Definition at line 3724 of file qcustomplot.cpp.

◆ sizeConstraintsChanged()

void QCPLayout::sizeConstraintsChanged ( ) const
protected

Subclasses call this method to report changed (minimum/maximum) size constraints.

If the parent of this layout is again a QCPLayout, forwards the call to the parent's sizeConstraintsChanged. If the parent is a QWidget (i.e. is the QCustomPlot::plotLayout of QCustomPlot), calls QWidget::updateGeometry, so if the QCustomPlot widget is inside a Qt QLayout, it may update itself and resize cells accordingly.

Definition at line 3794 of file qcustomplot.cpp.

◆ take()

virtual bool QCPLayout::take ( QCPLayoutElement * element)
pure virtual

Removes the specified element from the layout and returns true on success.

If the element isn't in this layout, returns false.

Note that some layouts don't remove the respective cell right away but leave an empty cell after successful removal of the layout element. To collapse empty cells, use simplify.

See also
takeAt

Implemented in QCPLayoutGrid, and QCPLayoutInset.

◆ takeAt()

virtual QCPLayoutElement * QCPLayout::takeAt ( int index)
pure virtual

Removes the element with the given index from the layout and returns it.

If the index is invalid or the cell with that index is empty, returns nullptr.

Note that some layouts don't remove the respective cell right away but leave an empty cell after successful removal of the layout element. To collapse empty cells, use simplify.

See also
elementAt, take

Implemented in QCPLayoutGrid, and QCPLayoutInset.

◆ update()

void QCPLayout::update ( UpdatePhase phase)
overridevirtual

If phase is upLayout, calls updateLayout, which subclasses may reimplement to reposition and resize their cells.

Finally, the call is propagated down to all child QCPLayoutElements.

For details about this method and the update phases, see the documentation of QCPLayoutElement::update.

Reimplemented from QCPLayoutElement.

Definition at line 3679 of file qcustomplot.cpp.

◆ updateLayout()

void QCPLayout::updateLayout ( )
protectedvirtual

Subclasses reimplement this method to update the position and sizes of the child elements/cells via calling their QCPLayoutElement::setOuterRect. The default implementation does nothing.

The geometry used as a reference is the inner rect of this layout. Child elements should stay within that rect.

getSectionSizes may help with the reimplementation of this function.

See also
update

Reimplemented in QCPLayoutGrid, and QCPLayoutInset.

Definition at line 3814 of file qcustomplot.cpp.


The documentation for this class was generated from the following files:
This file is part of the KDE documentation.
Documentation copyright © 1996-2024 The KDE developers.
Generated on Fri Oct 11 2024 12:15:14 by doxygen 1.12.0 written by Dimitri van Heesch, © 1997-2006

KDE's Doxygen guidelines are available online.