KConfigDialogManager Class Reference

#include <KConfigDialogManager>

Inheritance diagram for KConfigDialogManager:

Signals
void	settingsChanged ()
void	widgetModified ()

Public Slots
void	setDefaultsIndicatorsVisible (bool enabled)
void	updateSettings ()
void	updateWidgets ()
void	updateWidgetsDefault ()

Public Member Functions
	KConfigDialogManager (QWidget *parent, KCoreConfigSkeleton *conf)
	~KConfigDialogManager () override
void	addWidget (QWidget *widget)
bool	hasChanged () const
bool	isDefault () const
Public Member Functions inherited from QObject
	QObject (QObject *parent)
QBindable< QString >	bindableObjectName ()
bool	blockSignals (bool block)
const QObjectList &	children () const const
QMetaObject::Connection	connect (const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const const
void	deleteLater ()
void	destroyed (QObject *obj)
bool	disconnect (const char *signal, const QObject *receiver, const char *method) const const
bool	disconnect (const QObject *receiver, const char *method) const const
void	dumpObjectInfo () const const
void	dumpObjectTree () const const
QList< QByteArray >	dynamicPropertyNames () const const
virtual bool	event (QEvent *e)
virtual bool	eventFilter (QObject *watched, QEvent *event)
T	findChild (const QString &name, Qt::FindChildOptions options) const const
QList< T >	findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const
QList< T >	findChildren (const QString &name, Qt::FindChildOptions options) const const
QList< T >	findChildren (Qt::FindChildOptions options) const const
bool	inherits (const char *className) const const
void	installEventFilter (QObject *filterObj)
bool	isQuickItemType () const const
bool	isWidgetType () const const
bool	isWindowType () const const
void	killTimer (int id)
virtual const QMetaObject *	metaObject () const const
void	moveToThread (QThread *targetThread)
QString	objectName () const const
void	objectNameChanged (const QString &objectName)
QObject *	parent () const const
QVariant	property (const char *name) const const
	Q_CLASSINFO (Name, Value)
	Q_EMIT Q_EMIT
	Q_ENUM (...)
	Q_ENUM_NS (...)
	Q_ENUMS (...)
	Q_FLAG (...)
	Q_FLAG_NS (...)
	Q_FLAGS (...)
	Q_GADGET Q_GADGET
	Q_GADGET_EXPORT (EXPORT_MACRO)
	Q_INTERFACES (...)
	Q_INVOKABLE Q_INVOKABLE
	Q_MOC_INCLUDE Q_MOC_INCLUDE
	Q_NAMESPACE Q_NAMESPACE
	Q_NAMESPACE_EXPORT (EXPORT_MACRO)
	Q_OBJECT Q_OBJECT
	Q_PROPERTY (...)
	Q_REVISION Q_REVISION
	Q_SET_OBJECT_NAME (Object)
	Q_SIGNAL Q_SIGNAL
	Q_SIGNALS Q_SIGNALS
	Q_SLOT Q_SLOT
	Q_SLOTS Q_SLOTS
T	qobject_cast (const QObject *object)
T	qobject_cast (QObject *object)
	QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT
void	removeEventFilter (QObject *obj)
void	setObjectName (const QString &name)
void	setObjectName (QAnyStringView name)
void	setParent (QObject *parent)
bool	setProperty (const char *name, const QVariant &value)
bool	setProperty (const char *name, QVariant &&value)
bool	signalsBlocked () const const
int	startTimer (int interval, Qt::TimerType timerType)
int	startTimer (std::chrono::milliseconds interval, Qt::TimerType timerType)
QThread *	thread () const const

Static Public Member Functions
static QHash< QString, QByteArray > *	propertyMap ()
Static Public Member Functions inherited from QObject
QMetaObject::Connection	connect (const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
QMetaObject::Connection	connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type)
QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, const QObject *context, Functor functor, Qt::ConnectionType type)
QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method, Qt::ConnectionType type)
QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)
bool	disconnect (const QMetaObject::Connection &connection)
bool	disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *method)
bool	disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method)
bool	disconnect (const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method)
QString	tr (const char *sourceText, const char *disambiguation, int n)

Protected Member Functions
QByteArray	getCustomProperty (const QWidget *widget) const
QByteArray	getCustomPropertyChangedSignal (const QWidget *widget) const
QByteArray	getUserProperty (const QWidget *widget) const
QByteArray	getUserPropertyChangedSignal (const QWidget *widget) const
void	init (bool trackChanges)
bool	parseChildren (const QWidget *widget, bool trackChanges)
QVariant	property (QWidget *w) const
void	setProperty (QWidget *w, const QVariant &v)
void	setupWidget (QWidget *widget, KConfigSkeletonItem *item)
Protected Member Functions inherited from QObject
virtual void	childEvent (QChildEvent *event)
virtual void	connectNotify (const QMetaMethod &signal)
virtual void	customEvent (QEvent *event)
virtual void	disconnectNotify (const QMetaMethod &signal)
bool	isSignalConnected (const QMetaMethod &signal) const const
int	receivers (const char *signal) const const
QObject *	sender () const const
int	senderSignalIndex () const const
virtual void	timerEvent (QTimerEvent *event)

Static Protected Member Functions
static void	initMaps ()

Additional Inherited Members
Public Types inherited from QObject
typedef	QObjectList
Properties inherited from QObject
	objectName

Detailed Description

Provides a means of automatically retrieving, saving and resetting KConfigSkeleton based settings in a dialog.

The KConfigDialogManager class provides a means of automatically retrieving, saving and resetting basic settings. It also can emit signals when settings have been changed (settings were saved) or modified (the user changes a checkbox from on to off).

The object names of the widgets to be managed have to correspond to the names of the configuration entries in the KConfigSkeleton object plus an additional "kcfg_" prefix. For example a widget with the object name "kcfg_MyOption" would be associated to the configuration entry "MyOption".

The widget classes of Qt and KDE Frameworks are supported out of the box, for other widgets see below:

Using Custom Widgets

Custom widget classes are supported if they have a Q_PROPERTY defined for the property representing the value edited by the widget. By default the property is used for which "USER true" is set. For using another property, see below.

Example:

A class ColorEditWidget is used in the settings UI to select a color. The color value is set and read as type QColor. For that it has a definition of the value property similar to this:

Q_PROPERTY(QColor color READ color WRITE setColor NOTIFY colorChanged USER true)

And of course it has the definition and implementation of the respective read & write methods and the notify signal. This class then can be used directly with KConfigDialogManager and does not need further setup.

Using Other Properties than The USER Property

To use a widget's property that is not the USER property, the property to use can be selected by setting onto the widget instance a property with the key "kcfg_property" and as the value the name of the property:

ColorEditWidget *myWidget = new ColorEditWidget;
myWidget->setProperty("kcfg_property", QByteArray("redColorPart"));

This selection of the property to use is just valid for this widget instance. When using a UI file, the "kcfg_property" property can also be set using Qt Designer.

Configuring Classes to use Other Properties Globally

Alternatively a non-USER property can be defined for a widget class globally by registering it for the class in the KConfigDialogManager::propertyMap(). This global registration has lower priority than any "kcfg_property" property set on a class instance though, so the latter overrules this global setting. Note: setting the property in the propertyMap affects any instances of that widget class in the current application, so use only when needed and prefer instead the "kcfg_property" property. Especially with software with many libraries and 3rd-party plugins in one process there is a chance of conflicting settings.

Example:

If the ColorEditWidget has another property redColor defined by

Q_PROPERTY(int redColorPart READ redColorPart WRITE setRedColorPart NOTIFY redColorPartChanged)

and this one should be used in the settings, call somewhere in the code before using the settings:

KConfigDialogManager::propertyMap()->insert("ColorEditWidget", QByteArray("redColorPart"));

Using Different Signals than The NOTIFY Signal

If some non-default signal should be used, e.g. because the property to use does not have a NOTIFY setting, for a given widget instance the signal to use can be set by a property with the key "kcfg_propertyNotify" and as the value the signal signature. This will take priority over the signal noted by NOTIFY for the chosen property as well as the content of KConfigDialogManager::changedMap(). Since 5.32.

Example:

If for a class OtherColorEditWidget there was no NOTIFY set on the USER property, but some signal colorSelected(QColor) defined which would be good enough to reflect the settings change, defined by

Q_PROPERTY(QColor color READ color WRITE setColor USER true)
Q_SIGNALS:
    void colorSelected(const QColor &color);

the signal to use would be defined by this:

OtherColorEditWidget *myWidget = new OtherColorEditWidget;
myWidget->setProperty("kcfg_propertyNotify", QByteArray(SIGNAL(colorSelected(QColor))));

Author

Benjamin C Meyer <ben+kdelibs at meyerhome dot net>

Waldo Bastian basti.nosp@m.an@k.nosp@m.de.or.nosp@m.g

Definition at line 131 of file kconfigdialogmanager.h.

Constructor & Destructor Documentation

KConfigDialogManager()

KConfigDialogManager::KConfigDialogManager	(	QWidget *	parent,
		KCoreConfigSkeleton *	conf )

Constructor.

Parameters

parent	Dialog widget to manage
conf	Object that contains settings

Definition at line 31 of file kconfigdialogmanager.cpp.

~KConfigDialogManager()

KConfigDialogManager::~KConfigDialogManager ( )

overridedefault

Destructor.

Member Function Documentation

addWidget()

void KConfigDialogManager::addWidget

(

QWidget *

widget

)

Add additional widgets to manage.

Parameters

widget

Additional widget to manage, including all its children

Definition at line 113 of file kconfigdialogmanager.cpp.

getCustomProperty()

QByteArray KConfigDialogManager::getCustomProperty ( const QWidget * widget ) const

protected

Find the property to use for a widget by querying the "kcfg_property" property of the widget.

Like a widget can use a property other than the USER property.

Since

4.3

Definition at line 422 of file kconfigdialogmanager.cpp.

getCustomPropertyChangedSignal()

QByteArray KConfigDialogManager::getCustomPropertyChangedSignal ( const QWidget * widget ) const

protected

Find the changed signal of the property to use for a widget by querying the "kcfg_propertyNotify" property of the widget.

Like a widget can use a property change signal other than the one for USER property, if there even is one.

Since

5.32

Definition at line 454 of file kconfigdialogmanager.cpp.

getUserProperty()

QByteArray KConfigDialogManager::getUserProperty ( const QWidget * widget ) const

protected

Finds the USER property name using Qt's MetaProperty system, and caches it in the property map (the cache could be retrieved by propertyMap() ).

Definition at line 389 of file kconfigdialogmanager.cpp.

getUserPropertyChangedSignal()

QByteArray KConfigDialogManager::getUserPropertyChangedSignal ( const QWidget * widget ) const

protected

Finds the changed signal of the USER property using Qt's MetaProperty system.

Since

5.32

Definition at line 435 of file kconfigdialogmanager.cpp.

hasChanged()

bool KConfigDialogManager::hasChanged

(

)

const

Returns whether the current state of the known widgets are different from the state in the config object.

Definition at line 539 of file kconfigdialogmanager.cpp.

init()

void KConfigDialogManager::init ( bool trackChanges )

protected

Parameters

trackChanges

- If any changes by the widgets should be tracked set true. This causes the emitting the modified() signal when something changes. TODO:

Returns

bool - True if any setting was changed from the default.

Definition at line 104 of file kconfigdialogmanager.cpp.

initMaps()

void KConfigDialogManager::initMaps ( )

staticprotected

Initializes the property maps.

Definition at line 43 of file kconfigdialogmanager.cpp.

isDefault()

bool KConfigDialogManager::isDefault

(

)

const

Returns whether the current state of the known widgets are the same as the default state in the config object.

Definition at line 561 of file kconfigdialogmanager.cpp.

parseChildren()

bool KConfigDialogManager::parseChildren ( const QWidget * widget, bool trackChanges )

protected

Recursive function that finds all known children.

Goes through the children of widget and if any are known and not being ignored, stores them in currentGroup. Also checks if the widget should be disabled because it is set immutable.

Parameters

widget	- Parent of the children to look at.
trackChanges	- If true then tracks any changes to the children of widget that are known.

Returns

bool - If a widget was set to something other than its default.

Definition at line 183 of file kconfigdialogmanager.cpp.

property()

QVariant KConfigDialogManager::property ( QWidget * w ) const

protected

Retrieve a property.

Definition at line 505 of file kconfigdialogmanager.cpp.

propertyMap()

QHash< QString, QByteArray > * KConfigDialogManager::propertyMap ( )

static

Retrieve the map between widgets class names and the USER properties used for the configuration values.

Definition at line 98 of file kconfigdialogmanager.cpp.

setDefaultsIndicatorsVisible

void KConfigDialogManager::setDefaultsIndicatorsVisible ( bool enabled )

slot

Show or hide an indicator when settings have changed from their default value.

Update all widgets to show or hide the indicator accordingly.

Since

5.73

Definition at line 355 of file kconfigdialogmanager.cpp.

setProperty()

void KConfigDialogManager::setProperty ( QWidget * w, const QVariant & v )

protected

Set a property.

Definition at line 467 of file kconfigdialogmanager.cpp.

settingsChanged

void KConfigDialogManager::settingsChanged ( )

signal

One or more of the settings have been saved (such as when the user clicks on the Apply button).

This is only emitted by updateSettings() whenever one or more setting were changed and consequently saved.

setupWidget()

void KConfigDialogManager::setupWidget ( QWidget * widget, KConfigSkeletonItem * item )

protected

Setup secondary widget properties.

Definition at line 118 of file kconfigdialogmanager.cpp.

updateSettings

void KConfigDialogManager::updateSettings ( )

slot

Traverse the specified widgets, saving the settings of all known widgets in the settings object.

Example use: User clicks Ok or Apply button in a configure dialog.

Definition at line 360 of file kconfigdialogmanager.cpp.

updateWidgets

void KConfigDialogManager::updateWidgets ( )

slot

Traverse the specified widgets, sets the state of all known widgets according to the state in the settings object.

Example use: Initialisation of dialog. Example use: User clicks Reset button in a configure dialog.

Definition at line 308 of file kconfigdialogmanager.cpp.

updateWidgetsDefault

void KConfigDialogManager::updateWidgetsDefault ( )

slot

Traverse the specified widgets, sets the state of all known widgets according to the default state in the settings object.

Example use: User clicks Defaults button in a configure dialog.

Definition at line 347 of file kconfigdialogmanager.cpp.

widgetModified

void KConfigDialogManager::widgetModified ( )

signal

If retrieveSettings() was told to track changes then if any known setting was changed this signal will be emitted.

Note that a settings can be modified several times and might go back to the original saved state. hasChanged() will tell you if anything has actually changed from the saved values.

---

The documentation for this class was generated from the following files:

• kconfigdialogmanager.h
• kconfigdialogmanager.cpp