KCoreDirLister

#include <KCoreDirLister>

Inheritance diagram for KCoreDirLister:

[legend]

Public Types
enum	OpenUrlFlag { NoFlags = 0x0 , Keep = 0x1 , Reload = 0x2 }

typedef QFlags< OpenUrlFlag >	OpenUrlFlags

enum	WhichItems { AllItems = 0 , FilteredItems = 1 }

Public Types inherited from QObject
typedef	QObjectList

Properties
bool	autoErrorHandlingEnabled

bool	autoUpdate

bool	delayedMimeTypes

bool	dirOnlyMode

QStringList	mimeFilter

QString	nameFilter

bool	requestMimeTypeWhileListing

bool	showHiddenFiles

Properties inherited from QObject
	objectName

Signals
void	canceled ()

void	clear ()

void	clearDir (const QUrl &dirUrl)

void	completed ()

void	infoMessage (const QString &msg)

void	itemsAdded (const QUrl &directoryUrl, const KFileItemList &items)

void	itemsDeleted (const KFileItemList &items)

void	itemsFilteredByMime (const KFileItemList &items)

void	jobError (KIO::Job *job)

void	listingDirCanceled (const QUrl &dirUrl)

void	listingDirCompleted (const QUrl &dirUrl)

void	newItems (const KFileItemList &items)

void	percent (int percent)

void	processedSize (KIO::filesize_t size)

void	redirection (const QUrl &oldUrl, const QUrl &newUrl)

void	refreshItems (const QList< QPair< KFileItem, KFileItem > > &items)

void	speed (int bytes_per_second)

void	started (const QUrl &dirUrl)

void	totalSize (KIO::filesize_t size)

Public Member Functions
	KCoreDirLister (QObject *parent=nullptr)

	~KCoreDirLister () override

bool	autoErrorHandlingEnabled () const

bool	autoUpdate () const

void	clearMimeFilter ()

bool	delayedMimeTypes () const

QList< QUrl >	directories () const

bool	dirOnlyMode () const

void	emitChanges ()

KFileItem	findByName (const QString &name) const

KFileItem	findByUrl (const QUrl &url) const

void	forgetDirs (const QUrl &dirUrl)

bool	isFinished () const

KFileItemList	items (WhichItems which=FilteredItems) const

KFileItemList	itemsForDir (const QUrl &dirUrl, WhichItems which=FilteredItems) const

QStringList	mimeFilters () const

QString	nameFilter () const

bool	openUrl (const QUrl &dirUrl, OpenUrlFlags flags=NoFlags)

bool	requestMimeTypeWhileListing () const

KFileItem	rootItem () const

void	setAutoErrorHandlingEnabled (bool enable)

void	setAutoUpdate (bool enable)

void	setDelayedMimeTypes (bool delayedMimeTypes)

void	setDirOnlyMode (bool dirsOnly)

void	setMimeExcludeFilter (const QStringList &mimeList)

void	setMimeFilter (const QStringList &mimeList)

void	setNameFilter (const QString &filter)

void	setRequestMimeTypeWhileListing (bool request)

void	setShowHiddenFiles (bool showHiddenFiles)

bool	showHiddenFiles () const

void	stop ()

void	stop (const QUrl &dirUrl)

void	updateDirectory (const QUrl &dirUrl)

QUrl	url () const

Public Member Functions inherited from QObject
	QObject (QObject *parent)

QBindable< QString >	bindableObjectName ()

bool	blockSignals (bool block)

const QObjectList &	children () const const

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *method, Qt::ConnectionType type) const const

void	deleteLater ()

void	destroyed (QObject *obj)

bool	disconnect (const char signal, const QObject receiver, const char *method) const const

bool	disconnect (const QObject receiver, const char method) const const

void	dumpObjectInfo () const const

void	dumpObjectTree () const const

QList< QByteArray >	dynamicPropertyNames () const const

virtual bool	event (QEvent *e)

virtual bool	eventFilter (QObject watched, QEvent event)

T	findChild (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (Qt::FindChildOptions options) const const

bool	inherits (const char *className) const const

void	installEventFilter (QObject *filterObj)

bool	isQuickItemType () const const

bool	isWidgetType () const const

bool	isWindowType () const const

void	killTimer (int id)

virtual const QMetaObject *	metaObject () const const

void	moveToThread (QThread *targetThread)

QString	objectName () const const

void	objectNameChanged (const QString &objectName)

QObject *	parent () const const

QVariant	property (const char *name) const const

	Q_CLASSINFO (Name, Value)

	Q_EMIT Q_EMIT

	Q_ENUM (...)

	Q_ENUM_NS (...)

	Q_ENUMS (...)

	Q_FLAG (...)

	Q_FLAG_NS (...)

	Q_FLAGS (...)

	Q_GADGET Q_GADGET

	Q_GADGET_EXPORT (EXPORT_MACRO)

	Q_INTERFACES (...)

	Q_INVOKABLE Q_INVOKABLE

	Q_MOC_INCLUDE Q_MOC_INCLUDE

	Q_NAMESPACE Q_NAMESPACE

	Q_NAMESPACE_EXPORT (EXPORT_MACRO)

	Q_OBJECT Q_OBJECT

	Q_PROPERTY (...)

	Q_REVISION Q_REVISION

	Q_SET_OBJECT_NAME (Object)

	Q_SIGNAL Q_SIGNAL

	Q_SIGNALS Q_SIGNALS

	Q_SLOT Q_SLOT

	Q_SLOTS Q_SLOTS

T	qobject_cast (const QObject *object)

T	qobject_cast (QObject *object)

	QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT

void	removeEventFilter (QObject *obj)

void	setObjectName (const QString &name)

void	setObjectName (QAnyStringView name)

void	setParent (QObject *parent)

bool	setProperty (const char *name, const QVariant &value)

bool	setProperty (const char *name, QVariant &&value)

bool	signalsBlocked () const const

int	startTimer (int interval, Qt::TimerType timerType)

int	startTimer (std::chrono::milliseconds interval, Qt::TimerType timerType)

QThread *	thread () const const

Static Public Member Functions
static KFileItem	cachedItemForUrl (const QUrl &url)

Static Public Member Functions inherited from QObject
QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject context, Functor functor, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)

bool	disconnect (const QMetaObject::Connection &connection)

bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char method)

bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method)

bool	disconnect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method)

QString	tr (const char sourceText, const char disambiguation, int n)

Protected Member Functions
virtual void	jobStarted (KIO::ListJob *)

Protected Member Functions inherited from QObject
virtual void	childEvent (QChildEvent *event)

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	customEvent (QEvent *event)

virtual void	disconnectNotify (const QMetaMethod &signal)

bool	isSignalConnected (const QMetaMethod &signal) const const

int	receivers (const char *signal) const const

QObject *	sender () const const

int	senderSignalIndex () const const

virtual void	timerEvent (QTimerEvent *event)

Detailed Description

Helper class for the kiojob used to list and update a directory.

The dir lister deals with the kiojob used to list and update a directory and has signals for the user of this class (e.g. konqueror view or kdesktop) to create/destroy its items when asked.

This class is independent from the graphical representation of the dir (icon container, tree view, ...) and it stores the items (as KFileItems).

Typical usage :

Create an instance.
Connect to at least update, clear, itemsAdded, and itemsDeleted.
Call openUrl - the signals will be called.
Reuse the instance when opening a new url (openUrl).
Destroy the instance when not needed anymore (usually destructor).

Advanced usage : call openUrl with OpenUrlFlag::Keep to list directories without forgetting the ones previously read (e.g. for a tree view)

Author: Michael Brade brade.nosp@m.@kde.nosp@m..org

Definition at line 53 of file kcoredirlister.h.

Member Typedef Documentation

◆ OpenUrlFlags

QFlags< OpenUrlFlag > KCoreDirLister::OpenUrlFlags

Stores a combination of OpenUrlFlag values.

Definition at line 89 of file kcoredirlister.h.

Member Enumeration Documentation

◆ OpenUrlFlag

enum KCoreDirLister::OpenUrlFlag

See also: OpenUrlFlags

Enumerator

Enumerator
NoFlags	No additional flags specified.
Keep	Previous directories aren't forgotten. (they are still watched by kdirwatch and their items are kept for this KCoreDirLister). This is useful for e.g. a treeview.
Reload	Indicates whether to use the cache or to reread the directory from the disk. Use only when opening a dir not yet listed by this lister without using the cache. Otherwise use updateDirectory.

NoFlags

No additional flags specified.

Keep

Previous directories aren't forgotten.

(they are still watched by kdirwatch and their items are kept for this KCoreDirLister). This is useful for e.g. a treeview.

Reload

Indicates whether to use the cache or to reread the directory from the disk.

Use only when opening a dir not yet listed by this lister without using the cache. Otherwise use updateDirectory.

Definition at line 72 of file kcoredirlister.h.

◆ WhichItems

enum KCoreDirLister::WhichItems

Used by items() and itemsForDir() to specify whether you want all items for a directory or just the filtered ones.

Definition at line 393 of file kcoredirlister.h.

Property Documentation

◆ autoErrorHandlingEnabled

bool KCoreDirLister::autoErrorHandlingEnabled

readwrite

Definition at line 66 of file kcoredirlister.h.

◆ autoUpdate

bool KCoreDirLister::autoUpdate

readwrite

Definition at line 59 of file kcoredirlister.h.

◆ delayedMimeTypes

bool KCoreDirLister::delayedMimeTypes

readwrite

Definition at line 62 of file kcoredirlister.h.

◆ dirOnlyMode

bool KCoreDirLister::dirOnlyMode

readwrite

Definition at line 61 of file kcoredirlister.h.

◆ mimeFilter

QStringList KCoreDirLister::mimeFilter

readwrite

Definition at line 65 of file kcoredirlister.h.

◆ nameFilter

QString KCoreDirLister::nameFilter

readwrite

Definition at line 64 of file kcoredirlister.h.

◆ requestMimeTypeWhileListing

bool KCoreDirLister::requestMimeTypeWhileListing

readwrite

Definition at line 63 of file kcoredirlister.h.

◆ showHiddenFiles

bool KCoreDirLister::showHiddenFiles

readwrite

Definition at line 60 of file kcoredirlister.h.

Constructor & Destructor Documentation

◆ KCoreDirLister()

KCoreDirLister::KCoreDirLister ( QObject * parent = nullptr )

Create a directory lister.

Definition at line 2099 of file kcoredirlister.cpp.

◆ ~KCoreDirLister()

KCoreDirLister::~KCoreDirLister ( )

override

Destroy the directory lister.

Definition at line 2112 of file kcoredirlister.cpp.

Member Function Documentation

◆ autoErrorHandlingEnabled()

bool KCoreDirLister::autoErrorHandlingEnabled ( ) const

Checks whether auto error handling is enabled.

If enabled, it will show an error dialog to the user when an error occurs (assuming the application links to KIOWidgets). It is turned on by default.

Returns: true if auto error handling is enabled, false otherwise

See also: setAutoErrorHandlingEnabled()

Since: 5.82

Definition at line 2759 of file kcoredirlister.cpp.

◆ autoUpdate()

bool KCoreDirLister::autoUpdate ( ) const

Checks whether KDirWatch will automatically update directories.

This is enabled by default.

Returns: true if KDirWatch is used to automatically update directories

Definition at line 2151 of file kcoredirlister.cpp.

◆ cachedItemForUrl()

KFileItem KCoreDirLister::cachedItemForUrl ( const QUrl & url )

static

Return the KFileItem for the given URL, if it was listed recently and it's still in the cache, which is always the case if a directory view is currently showing this item.

If not, then it might be in the cache; if not in the cache a a null KFileItem will be returned.

If you really need a KFileItem for this URL in all cases, then use KIO::stat() instead.

Definition at line 2750 of file kcoredirlister.cpp.

◆ canceled

void KCoreDirLister::canceled ( )

signal

Tell the view that the user canceled the listing.

No running jobs are left.

◆ clear

void KCoreDirLister::clear ( )

signal

Signals to the view to remove all items (when e.g. going from dirA to dirB).

Make sure to connect to this signal to avoid having duplicate items in the view.

◆ clearDir

void KCoreDirLister::clearDir ( const QUrl & dirUrl )

signal

Signals to the view to clear all items from directory dirUrl.

This is only emitted if the lister is holding more than one directory.

Parameters

dirUrl the directory that the view should clear all items from

Since: 5.79

◆ clearMimeFilter()

void KCoreDirLister::clearMimeFilter ( )

Clears the MIME type based filter.

You need to call emitChanges() afterwards.

See also: setMimeFilter

Definition at line 2368 of file kcoredirlister.cpp.

◆ completed

void KCoreDirLister::completed ( )

signal

Tell the view that listing is finished.

There are no jobs running anymore.

◆ delayedMimeTypes()

bool KCoreDirLister::delayedMimeTypes ( ) const

Returns: true if the "delayed MIME types" feature was enabled

See also: setDelayedMimeTypes

Definition at line 2684 of file kcoredirlister.cpp.

◆ directories()

QList< QUrl > KCoreDirLister::directories ( ) const

Returns all URLs that are listed by this KCoreDirLister.

This is only useful if you called openUrl() with OpenUrlFlag::Keep, as it happens in a treeview, for example. (Note that the base url is included in the list as well, of course.)

Returns: a list of all listed URLs

Definition at line 2221 of file kcoredirlister.cpp.

◆ dirOnlyMode()

bool KCoreDirLister::dirOnlyMode ( ) const

Checks whether this KCoreDirLister only lists directories or all items (directories and files), by default all items are listed.

Returns: true if only directories are listed, false otherwise

See also: setDirOnlyMode(bool)

Definition at line 2181 of file kcoredirlister.cpp.

◆ emitChanges()

void KCoreDirLister::emitChanges ( )

Actually emit the changes made with setShowHiddenFiles, setDirOnlyMode, setNameFilter and setMimeFilter.

Definition at line 2226 of file kcoredirlister.cpp.

◆ findByName()

KFileItem KCoreDirLister::findByName ( const QString & name ) const

Find an item by its name.

Parameters

name	the item name

Returns: the KFileItem

Definition at line 2315 of file kcoredirlister.cpp.

◆ findByUrl()

KFileItem KCoreDirLister::findByUrl ( const QUrl & url ) const

Find an item by its URL.

Parameters

url	the item URL

Returns: the KFileItem

Definition at line 2310 of file kcoredirlister.cpp.

◆ forgetDirs()

void KCoreDirLister::forgetDirs ( const QUrl & dirUrl )

Stop listening for further changes in the given directory.

When a new directory is opened with OpenUrlFlag::Keep the caller will keep being notified of file changes for all directories that were kept open. This call selectively removes a directory from sending future notifications to this KCoreDirLister.

Parameters

dirUrl the directory URL.

Since: 5.91

Definition at line 2146 of file kcoredirlister.cpp.

◆ infoMessage

void KCoreDirLister::infoMessage ( const QString & msg )

signal

Emitted to display information about running jobs.

Examples of message are "Resolving host", "Connecting to host...", etc.

Parameters

msg	the info message

◆ isFinished()

bool KCoreDirLister::isFinished ( ) const

Returns true if no I/O operation is currently in progress.

Returns: true if finished, false otherwise

Definition at line 2300 of file kcoredirlister.cpp.

◆ items()

KFileItemList KCoreDirLister::items ( WhichItems which = FilteredItems ) const

Returns the items listed for the current url().

This method will not start listing a directory, you should only call this in a slot connected to the finished() signal.

The items in the KFileItemList are copies of the items used by KCoreDirLister.

Parameters

which specifies whether the returned list will contain all entries or only the ones that passed the nameFilter(), mimeFilter(), etc. Note that the latter causes iteration over all the items, filtering them. If this is too slow for you, use the newItems() signal, sending out filtered items in chunks

Returns: the items listed for the current url()

Definition at line 2661 of file kcoredirlister.cpp.

◆ itemsAdded

void KCoreDirLister::itemsAdded	(	const QUrl &	directoryUrl,
		const KFileItemList &	items )

signal

Signal that new items were found during directory listing.

Alternative signal emitted at the same time as newItems(), but itemsAdded also passes the url of the parent directory.

Parameters

items a list of new items

◆ itemsDeleted

void KCoreDirLister::itemsDeleted ( const KFileItemList & items )

signal

Signal that items have been deleted.

Since: 4.1.2

Parameters

items the list of deleted items

◆ itemsFilteredByMime

void KCoreDirLister::itemsFilteredByMime ( const KFileItemList & items )

signal

Send a list of items filtered-out by MIME type.

Parameters

items the list of filtered items

◆ itemsForDir()

KFileItemList KCoreDirLister::itemsForDir	(	const QUrl &	dirUrl,
		WhichItems	which = FilteredItems ) const

Returns the items listed for the given dirUrl.

This method will not start listing dirUrl, you should only call this in a slot connected to the finished() signal.

The items in the KFileItemList are copies of the items used by KCoreDirLister.

Parameters

dirUrl	specifies the url for which the items should be returned. This is only useful if you use KCoreDirLister with multiple URLs i.e. using bool OpenUrlFlag::Keep in openUrl()
which	specifies whether the returned list will contain all entries or only the ones that passed the nameFilter, mimeFilter, etc. Note that the latter causes iteration over all the items, filtering them. If this is too slow for you, use the newItems() signal, sending out filtered items in chunks

Returns: the items listed for dirUrl

Definition at line 2666 of file kcoredirlister.cpp.

◆ jobError

void KCoreDirLister::jobError ( KIO::Job * job )

signal

Emitted if listing a directory fails with an error.

A typical implementation in a widgets-based application would show a message box by calling this in a slot connected to this signal: job->uiDelegate()->showErrorMessage() Many applications might prefer to embed the error message though (e.g. by using the KMessageWidget class, from the KWidgetsAddons Framework).

Parameters

the	job with an error

Since: 5.82

◆ jobStarted()

void KCoreDirLister::jobStarted ( KIO::ListJob * job )

protectedvirtual

Reimplemented by KDirLister to associate windows with jobs.

Since: 5.0

Reimplemented in KDirLister.

Definition at line 2628 of file kcoredirlister.cpp.

◆ listingDirCanceled

void KCoreDirLister::listingDirCanceled ( const QUrl & dirUrl )

signal

Tell the view that the listing of the directory dirUrl was canceled.

There might be other running jobs left.

Parameters

dirUrl the directory URL

Since: 5.79

◆ listingDirCompleted

void KCoreDirLister::listingDirCompleted ( const QUrl & dirUrl )

signal

Tell the view that the listing of the directory dirUrl is finished.

There might be other running jobs left.

Parameters

dirUrl the directory URL

Since: 5.79

◆ mimeFilters()

QStringList KCoreDirLister::mimeFilters ( ) const

Returns the list of MIME type based filters, as set via setMimeFilter().

Returns: the list of MIME type based filters. Empty, when no MIME type filter is set.

Definition at line 2375 of file kcoredirlister.cpp.

◆ nameFilter()

QString KCoreDirLister::nameFilter ( ) const

Returns the current name filter, as set via setNameFilter()

Returns: the current name filter, can be QString() if filtering is turned off

Definition at line 2339 of file kcoredirlister.cpp.

◆ newItems

void KCoreDirLister::newItems ( const KFileItemList & items )

signal

Signal new items.

Parameters

items a list of new items

◆ openUrl()

bool KCoreDirLister::openUrl	(	const QUrl &	dirUrl,
		OpenUrlFlags	flags = NoFlags )

Run the directory lister on the given url.

This method causes KCoreDirLister to emit all the items of dirUrl, in any case. Depending on flags, either clear() or clearDir(const QUrl &) will be emitted first.

The newItems() signal may be emitted more than once to supply you with KFileItems, up until the signal completed() is emitted (and isFinished() returns true).

Parameters

dirUrl	the directory URL.
flags	whether to keep previous directories, and whether to reload, see OpenUrlFlags

Returns: true if successful, false otherwise (e.g. if dirUrl is invalid)

Definition at line 2124 of file kcoredirlister.cpp.

◆ percent

void KCoreDirLister::percent ( int percent )

signal

Progress signal showing the overall progress of the KCoreDirLister.

This allows using a progress bar very easily. (see QProgressBar)

Parameters

percent the progress in percent

◆ processedSize

void KCoreDirLister::processedSize ( KIO::filesize_t size )

signal

Regularly emitted to show the progress of this KCoreDirLister.

Parameters

size	the processed size in bytes

◆ redirection

void KCoreDirLister::redirection	(	const QUrl &	oldUrl,
		const QUrl &	newUrl )

signal

Signals a redirection.

Parameters

oldUrl	the original URL
newUrl	the new URL

◆ refreshItems

void KCoreDirLister::refreshItems ( const QList< QPair< KFileItem, KFileItem > > & items )

signal

Signal an item to refresh (its MIME-type/icon/name has changed).

Note: KFileItem::refresh has already been called on those items.

Parameters

items the items to refresh. This is a list of pairs, where the first item in the pair is the OLD item, and the second item is the NEW item. This allows to track which item has changed, especially after a renaming.

◆ requestMimeTypeWhileListing()

bool KCoreDirLister::requestMimeTypeWhileListing ( ) const

Checks whether this KCoreDirLister requests the MIME type of files from the worker.

Enabling this will tell the worker used for listing that it should try to determine the mime type of entries while listing them. This potentially reduces the speed at which entries are listed but ensures mime types are immediately available when an entry is added, greatly speeding up things like mime type filtering.

By default this is disabled.

Returns: true if the worker is asked for MIME types, false otherwise.

See also: setRequestMimeTypeWhileListing(bool)

Since: 5.82

Definition at line 2196 of file kcoredirlister.cpp.

◆ rootItem()

KFileItem KCoreDirLister::rootItem ( ) const

Returns the file item of the URL.

Can return an empty KFileItem.

Returns: the file item for url() itself (".")

Definition at line 2305 of file kcoredirlister.cpp.

◆ setAutoErrorHandlingEnabled()

void KCoreDirLister::setAutoErrorHandlingEnabled ( bool enable )

Enable or disable auto error handling.

If enabled, it will show an error dialog to the user when an error occurs. It is turned on by default.

Parameters

enable	true to enable auto error handling, false to disable
parent	the parent widget for the error dialogs, can be `nullptr` for top-level

See also: autoErrorHandlingEnabled()

Since: 5.82

Definition at line 2764 of file kcoredirlister.cpp.

◆ setAutoUpdate()

void KCoreDirLister::setAutoUpdate ( bool enable )

Toggle automatic directory updating, when a directory changes (using KDirWatch).

Parameters

enable set to true to enable or false to disable

Definition at line 2156 of file kcoredirlister.cpp.

◆ setDelayedMimeTypes()

void KCoreDirLister::setDelayedMimeTypes ( bool delayedMimeTypes )

Delayed MIME types feature: If enabled, MIME types will be fetched on demand, which leads to a faster initial directory listing, where icons get progressively replaced with the correct one while KMimeTypeResolver is going through the items with unknown or imprecise MIME type (e.g.

files with no extension or an unknown extension).

Definition at line 2689 of file kcoredirlister.cpp.

◆ setDirOnlyMode()

void KCoreDirLister::setDirOnlyMode ( bool dirsOnly )

Call this to list only directories (by default all items (directories and files) are listed).

You need to call emitChanges() afterwards.

Parameters

dirsOnly set to true to list only directories

Definition at line 2186 of file kcoredirlister.cpp.

◆ setMimeExcludeFilter()

void KCoreDirLister::setMimeExcludeFilter ( const QStringList & mimeList )

Filtering should be done with KFileFilter.

This will be implemented in a later revision of KCoreDirLister. This method may be removed then.

Set MIME type based exclude filter to only list items not matching the given MIME types

NOTE: setting the filter does not automatically reload directory. Also calling this function will not affect any named filter already set.

Parameters

mimeList a list of MIME types

See also: clearMimeFilter; matchesMimeFilter

Definition at line 2358 of file kcoredirlister.cpp.

◆ setMimeFilter()

void KCoreDirLister::setMimeFilter ( const QStringList & mimeList )

Set MIME type based filter to only list items matching the given MIME types.

NOTE: setting the filter does not automatically reload directory. Also calling this function will not affect any named filter already set.

You need to call emitChanges() afterwards.

Parameters

mimeList a list of MIME types

See also: clearMimeFilter; matchesMimeFilter

Definition at line 2344 of file kcoredirlister.cpp.

◆ setNameFilter()

void KCoreDirLister::setNameFilter ( const QString & filter )

Set a name filter to only list items matching this name, e.g. "*.cpp".

You can set more than one filter by separating them with whitespace, e.g "*.cpp *.h". Note: the directory is not automatically reloaded. You need to call emitChanges() afterwards.

Parameters

filter the new filter, QString() to disable filtering

See also: matchesFilter

Definition at line 2322 of file kcoredirlister.cpp.

◆ setRequestMimeTypeWhileListing()

void KCoreDirLister::setRequestMimeTypeWhileListing ( bool request )

Toggles whether to request MIME types from the worker or in-process.

Parameters

request set to true to request MIME types from the worker.

Note: If this is changed while the lister is already listing a directory, it will only have an effect the next time openUrl() is called.

See also: requestMimeTypeWhileListing()

Since: 5.82

Definition at line 2201 of file kcoredirlister.cpp.

◆ setShowHiddenFiles()

void KCoreDirLister::setShowHiddenFiles ( bool showHiddenFiles )

Toggles whether hidden files (e.g.

files whose name start with '.' on Unix) are shown/ By default hidden files are not shown.

You need to call emitChanges() afterwards.

Parameters

showHiddenFiles set to true/false to show/hide hidden files respectively

See also: showHiddenFiles()

Since: 5.100

Definition at line 2171 of file kcoredirlister.cpp.

◆ showHiddenFiles()

bool KCoreDirLister::showHiddenFiles ( ) const

Checks whether hidden files (e.g.

files whose name start with '.' on Unix) will be shown. By default this option is disabled (hidden files are not shown).

Returns: true if hidden files are shown, false otherwise

See also: setShowHiddenFiles()

Since: 5.100

Definition at line 2166 of file kcoredirlister.cpp.

◆ speed

void KCoreDirLister::speed ( int bytes_per_second )

signal

Emitted to display information about the speed of the jobs.

Parameters

bytes_per_second the speed in bytes/s

◆ started

void KCoreDirLister::started ( const QUrl & dirUrl )

signal

Tell the view that this KCoreDirLister has started to list dirUrl.

Note that this does not imply that there is really a job running! I.e. KCoreDirLister::jobs() may return an empty list, in which case the items are taken from the cache.

The view knows that openUrl should start it, so this might seem useless, but the view also needs to know when an automatic update happens.

Parameters

dirUrl the URL to list

◆ stop() [1/2]

void KCoreDirLister::stop ( )

Stop listing all directories currently being listed.

Emits canceled() if there was at least one job running. Emits listingDirCanceled(const QUrl &) for each stopped job if there is more than one directory being watched by this KCoreDirLister.

Definition at line 2136 of file kcoredirlister.cpp.

◆ stop() [2/2]

void KCoreDirLister::stop ( const QUrl & dirUrl )

Stop listing the given directory.

Emits canceled() if the killed job was the last running one. Emits listingDirCanceled(const QUrl &) for the killed job if there is more than one directory being watched by this KCoreDirLister.

No signal is emitted if there was no job running for dirUrl.

Parameters

dirUrl the directory URL

Definition at line 2141 of file kcoredirlister.cpp.

◆ totalSize

void KCoreDirLister::totalSize ( KIO::filesize_t size )

signal

Emitted when we know the size of the jobs.

Parameters

size	the total size in bytes

◆ updateDirectory()

void KCoreDirLister::updateDirectory ( const QUrl & dirUrl )

Update the directory dirUrl.

This method causes KCoreDirLister to only emit the items of dirUrl that actually changed compared to the current state in the cache, and updates the cache.

The current implementation calls updateDirectory automatically for local files, using KDirWatch (if autoUpdate() is true), but it might be useful to force an update manually.

Parameters

dirUrl the directory URL

Definition at line 2295 of file kcoredirlister.cpp.

◆ url()

QUrl KCoreDirLister::url ( ) const

Returns the top level URL that is listed by this KCoreDirLister.

It might be different from the one given with openUrl() if there was a redirection. If you called openUrl() with OpenUrlFlag::Keep this is the first url opened (e.g. in a treeview this is the root).

Returns: the url used by this instance to list the files

Definition at line 2216 of file kcoredirlister.cpp.

The documentation for this class was generated from the following files:

KDE's Doxygen guidelines are available online.

Class Picker

Quick Links

About KIO

KCoreDirLister

Public Types

Properties

Signals

Public Member Functions

Static Public Member Functions

Protected Member Functions

Detailed Description

Member Typedef Documentation

◆ OpenUrlFlags

Member Enumeration Documentation

◆ OpenUrlFlag

◆ WhichItems

Property Documentation

◆ autoErrorHandlingEnabled

◆ autoUpdate

◆ delayedMimeTypes

◆ dirOnlyMode

◆ mimeFilter

◆ nameFilter

◆ requestMimeTypeWhileListing

◆ showHiddenFiles

Constructor & Destructor Documentation

◆ KCoreDirLister()

◆ ~KCoreDirLister()

Member Function Documentation

◆ autoErrorHandlingEnabled()

◆ autoUpdate()

◆ cachedItemForUrl()

◆ canceled

◆ clear

◆ clearDir

◆ clearMimeFilter()

◆ completed

◆ delayedMimeTypes()

◆ directories()

◆ dirOnlyMode()

◆ emitChanges()

◆ findByName()

◆ findByUrl()

◆ forgetDirs()

◆ infoMessage

◆ isFinished()

◆ items()

◆ itemsAdded

◆ itemsDeleted

◆ itemsFilteredByMime

◆ itemsForDir()

◆ jobError

◆ jobStarted()

◆ listingDirCanceled

◆ listingDirCompleted

◆ mimeFilters()

◆ nameFilter()

◆ newItems

◆ openUrl()

◆ percent

◆ processedSize

◆ redirection

◆ refreshItems

◆ requestMimeTypeWhileListing()

◆ rootItem()

◆ setAutoErrorHandlingEnabled()

◆ setAutoUpdate()

◆ setDelayedMimeTypes()

◆ setDirOnlyMode()

◆ setMimeExcludeFilter()

◆ setMimeFilter()

◆ setNameFilter()

◆ setRequestMimeTypeWhileListing()

◆ setShowHiddenFiles()

◆ showHiddenFiles()

◆ speed

◆ started

◆ stop() [1/2]

◆ stop() [2/2]

◆ totalSize